2-auger mixing wagons

Capacity in m³: 18 m³ - 40 m³

The version with two and three screws is the optimum solution for companies that want to combine fast work with best quality of the product obtained.

Capacity in m³: 8 m³ - 44 m³

Capacity in m³: 16, 14, 10, 24, 18 m³

... its unique design, this range of machines has triumphed over all mixing tests undertaken by livestock farmers and independant companies. This success is based on the FEED-FLO Mixing Principle making ...

Capacity in m³: 16, 14, 18 m³

FXX series of mixer wagons are perfectly adapted to effective mixing, guaranteeing comfortable operation. The design was prepared for those who expect a simple, reliable machine. Designed ...

Capacity in m³: 18 m³ - 30 m³

... technology with one or two augers, and specifically designed to ensure excellent productivity, Grizzly 8000 S is characterized by high performances and large volume. This allows to establish itself as the most efficient ...

Capacity in m³: 1, 2 m³

SHW Double Ribbon Mixer machine widely used in medium and small scale feed mill, for mixing powder materials, guarantee uniformity and quality of complete feed。 FEATURES 1.Patented product, national ...

Capacity in m³: 9 m³ - 25 m³

In situations where feed needs to be placed into the centre of a double wide trough the Powermix fixed front conveyor option is ideal. This option is available on all tub sizes from 9 to 25m in single and twin tub configuration The same ...

Capacity in m³: 620, 540, 920, 720 ft³

... 8" and 1/2" flighting available for lower auger to extend life. Top augers available in 3/8" and 1/2" flighting. Commercial Scale Check System Load cell mounting comes ...

Capacity in m³: 6 m³ - 12 m³

Capacity in m³: 580 ft³ - 1,290 ft³

Twin screw vertical mixers in a trailer version with capacities from 580 to 1290 cubic feet. The mixing auger is pto driven, the door and discharge are hydraulically ...

Capacity in m³: 10 m³ - 30 m³

... The variety of our clients’ needs has enabled us to develop a mixing system, very technical and reliable, which is applied to all our models. Its endurance, low maintenance, rapid mixing, low power ...

Capacity in m³: 12.5 m³ - 31.2 m³

... pull type mixer has been designed to offer you a sober and efficient machine. Down to the smallest detail, this pull type mixer aims for excellence. 3 models are available, going from 440 to 900 ...

Capacity in m³: 7 m³ - 18 m³

The BOXER mixer wagon is the natural evolution of the experience gained from previous horizontal mixing machines (Marmix e Akita), from which the best features are highlighted: -soft ...

Capacity in m³: 10 m³ - 24 m³

... feed to the top of the mixing chamber. The feed also passes between the serrated knives where additional cutting is performed on the fibres. The mix reaches the top of the mixing chamber and gently tumbles ...

Capacity in m³: 20, 24 m³

Specifications Biga 20-230 Twin Rapide AS Future Length:9700 Width:2700 Height:3200 Bodem diameter (mm):2300 Specifications Biga 24-230 Twin Rapide AS Future Length:10500 Width:2600 Height:3450 Diameter bottom / Width:2300

Capacity in m³: 0.6 m³ - 4 m³

... dosed feeding in one pass Two-sides unloading Aerated and homogeneously mixed product Short mixing time Little residual feed in the bucket by new mixing auger Low fuel consumption ...

Capacity in m³: 14 m³

LENGTH - 6750 MM HEIGHT - 2850 MM WIDTH - 2300 MM TRACK WIDTH - 1620 MM WEIGHT - 5020 KG

Ares serie uses two vertical augers with boron-steel knives mixing system. The augers’ transmission is driven by epicyclic reduction gears. This machine has been studied to work with ...

Capacity in m³: 30 m³

Built for Here™ The self-propelled AM 1000s feed mixer was designed to solve the challenges farmers face when feeding cattle in extreme conditions. It is solidly built with a 300 HP engine, high ground ...

Capacity in m³: 2.5 m³

... Weight - Wagon Width - Wagon Height - Wagon Length - Total Width:1,49 m Total Height:1,72 m Total Length:3,55 m Min.Tractor Power Required:40 Hp Min. Shaft Devolution Required:540 ...

Capacity in m³: 8 m³

PELICAN 8M3 Pelican is designed for a homogenous mixture. It is produced according to the needs of all kinds of operators as 4m3, 6m3, 8m3, 10m3 with its stur¬dy and robust structure. The optional double side draining band allows the ...

... is suitable for mounting the cyclone inlet, etc. For filling with front loader or tip wagon, opened one or more of the top plate. Emptying is via a drain auger mixing across the width ...

Capacity in m³: 20 m³

... no dead spots because of the design of the auger and bucket so it is more hygenic compared to other mixers on the market. Also there is no feed left in the bucket after unloading. Easy to operate Fimaks ...

Capacity in m³: 7 m³ - 30 m³

... power absorption 40% lower than traditional systems. Available in the NT, WT and WL versions. NT series The 2+2 horizontal auger KING TMR Feed-Mixer is characterised by the Zago ...