{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Cutting width: 1.35, 1.55, 1.7, 0.95, 1.15 m
Rotational speed: 1,000, 540 rpm
Tractor power: 10 ch - 40 ch
FURBA is an offset mulcher for cutting grass and woody material up to 2 cm in diameter. Designed for professional use, it comes in working widths ranging from 100 to 180 cm for tractors in the 10 to 40 horsepower range. Small ...
MASCHIO GASPARDO
Cutting width: 1,250 mm - 2,389 mm
Rotational speed: 540 rpm
Tractor power: 50 ch - 120 ch
... widths: from 1250 to 2389 mm. ADVANTAGES Top quality hammers. Cast iron freewheel unit. Adjustable skids and roller. Cardan shaft included. Displaceable up to 500 mm From 12 to 24 hammers https://zeppelinmaquinaria.es/arizona-tech/
Zeppelin Maquinaria
Cutting width: 1,600, 2,000, 2,200, 2,400, 1,500 mm
Rotational speed: 540 rpm
Tractor power: 50 ch - 120 ch
... to the group and the 5 belts, the shredder transmits great power to the hammers with tractors of more than 50 hp. Displacement 500 mm. ADVANTAGES 5 top quality belts. Hammers on 168 mm shaft Height ...
Zeppelin Maquinaria
Cutting width: 850 mm - 1,750 mm
Rotational speed: 540 rpm
Tractor power: 10 ch - 90 ch
... orchards and greenhouses. Shreds brush and pruning waste up to 5 cm in diameter. Reinforced cast iron unit. Equipped with hammers (optional blades). Rear roller with cleaner/scraper. Available in different working ...
Zeppelin Maquinaria
Cutting width: 200, 140, 130, 160, 180 cm
Tractor power: 50 ch - 90 ch
Weight: 745, 790, 650, 665, 690 kg
-Helical rotor with a set of mobile hammers and counterhammers fitted in « U » shape for the best crushing. -Cast-iron gear hydraulic motor with drain line. -HBC system (Hydraulic Block Control) allowing the hydraulic ...
Cutting width: 1,000, 1,200, 1,400, 1,650 mm
Rotational speed: 3,150 rpm
Tractor power: 16 ch - 45 ch
... DELEKS® LINCE-100 - for 16-40Hp tractors, Pto shaft CE included, 330g heat forged hammers to shred vegetation up to 2,0-3,0 cm thick, OVERVIEW The LINCE-100 flail mower has been designed for low-powered ...
DELEKS SRL
Cutting width: 1,000, 1,200, 1,400, 1,650 mm
Rotational speed: 3,150 rpm
Tractor power: 14 ch - 45 ch
... Swedish SSAB steel. Rotor made with ARVEDI's tube, electronically balanced, 8mm thick S355 steel with hammers mounted on 6 rows instead of 4. Hammers attachments HARDOX made. SKF rotor bearings. Gearbox ...
DELEKS SRL
Cutting width: 1,400 mm
Rotational speed: 2,300 rpm
Tractor power: 30 ch - 60 ch
Shredder with hammers 140cm / 300kg for tractors - DELEKS® LINCIONE-140 - Pto shaft included. OVERVIEW Shredder with hammers for orchard, vineyard, olive grove and uncultivated areas. Professional ...
DELEKS SRL
Cutting width: 1,470, 1,720, 1,280 mm
Rotational speed: 540 rpm
Tractor power: 30, 22, 26 kW
Mulcher specially designed for compact tractors, ideal for shredding grass and vines up to 3 cm Ø. The machine enjoys the ability to quickly transform from normal or reverse, simply by changing the transmission. The ...
Cutting width: 1,200, 1,600, 1,400 mm
Rotational speed: 540 rpm
Tractor power: 12, 20, 30 ch
Designed for maintenance work in gardens and parks. Flailmower for grass and pruning up to Ø 2 cm. The shredder is equipped with free discharge after the roller which allows you to work continuously even in the most demanding working ...
Cutting width: 1,433, 1,585, 1,845 mm
Rotational speed: 540 rpm - 1,000 rpm
Tractor power: 36, 44, 29, 30 kW
... work on orchards, vineyards or small plots of land. For grass and pruning up to Ø 4 cm. The PANDA flail mower is equipped with double-edged hammers and an anti-clogging wheel, both Tierre patented, ...
Cutting width: 160, 180, 200, 220, 240 cm
Rotational speed: 540, 1,000 rpm
Tractor power: 40 ch - 90 ch
Parallelogram mulcher with hydraulic shift • Rounded right side with no hitch links • Helical cutting system • It cuts prunings of max. ø 5-6cm • Maxi lateral displacement for work under the canopy The TFO parallelogram ...
ZANON Srl
Cutting width: 210, 230, 250 cm
Rotational speed: 540, 1,000 rpm
Tractor power: 70 ch - 130 ch
Mulcher heavy duty with lateral movement • Linear cutting system • It cuts prunings of max. ø 8cm • 30cm inlet opening • Maxi lateral displacement for work under the canopy The TRE-PRO mulcher ...
ZANON Srl
Cutting width: 160, 190, 225, 250 cm
Rotational speed: 540, 1,000 rpm
Tractor power: 40 ch - 100 ch
Reversible mulcher medium duty • Linear cutting system • It cuts prunings of max. ø 5cm • Reversible • Double linkage PTO 540/1000rpm The TRV-PRO reversible mulcher medium duty is designed ...
ZANON Srl
Cutting width: 1,000, 600, 800 mm
Weight: 100, 115, 85 kg
... proof valve – anti cavitation valve – max pressure (it does not require drainage pipe) • Shaft with hammers or Y blades • Shaft with blades or hammers with fixed supports for a better shredding of the ...
Cutting width: 120 cm - 220 cm
Tractor power: 25 ch - 60 ch
Weight: 325 kg - 489 kg
Flail topper series UM is intended for usage on all agricultural areas, maintenance of green spaces and neglected fields. Mulches harvest residue and branches up to 5 cm in thickness. Quality and robust construction ...
Cutting width: 1,400 mm - 2,200 mm
Tractor power: 40 ch - 90 ch
Weight: 650 kg - 840 kg
Shredder for vineyard and orchard Size : Medium
Dragone S.r.l.
Cutting width: 100 cm - 160 cm
Rotational speed: 540, 1,000, 2,000 rpm
Tractor power: 20 ch - 40 ch
Lightweight shredder suitable for cutting grass and small branches. Standard equipment – Skids – 3 Point Rear Hitch – Multiplier with freewheel – Galvanized shafts – One counter-knife – Cardan excluded – Adjustable rear roller – ...
Dragone S.r.l.
Cutting width: 130 cm - 240 cm
Rotational speed: 540, 750, 1,000 rpm
Tractor power: 60 ch - 120 ch
... Adjustable rear roller – Multiplier with freewheel – Case thickness 10 mm – Case thickness 6 mm for MPFX in HARDOX – Knives or hammers – Right-side rounded panel and without protrusion – Double counter knife – ...
Dragone S.r.l.
Cutting width: 150 cm - 260 cm
Rotational speed: 540, 1,000 rpm
Tractor power: 50 ch - 90 ch
GOLDSTRONG is the Hardox series flail mower, specifically for tractors with 50 to 90 horsepower (min). The application is rear. The special Double Hardox frame, the three rows of counter-knives, the oversized rotor, the ...
Cutting width: 1.55, 1.8, 2 m
Rotational speed: 540 rpm
Tractor power: 25, 30, 35 ch
Mulchers for orchards and vineyards are a type of agricultural mulcher and are primarily designed for shredding of plant residue after pruning and for weed and grass in orchards and vineyards. Beside ...
FPM Agromehanika
Cutting width: 1,240 mm - 2,000 mm
Tractor power: 25 ch - 45 ch
Weight: 340 kg - 470 kg
The TLG Flail is a piece of equipment used for the shredding of grass and branches from the pruning of vineyards and orchards. It has a three-point hitch and can be applied to crawler and wheeled tractors. STANDARD ...
LI.PA. Srl
Cutting width: 1,340 mm - 2,000 mm
Tractor power: 25 ch - 45 ch
Weight: 435 kg - 570 kg
The TLGS Flail is a piece of equipment used for the shredding of grass and branches of vineyards and orchards. It has a three-point hitch and can be applied to crawler and wheeled tractors. The hydraulic displacement ...
LI.PA. Srl
Cutting width: 1,640, 1,540, 1,440, 1,740 mm
Tractor power: 30 ch - 45 ch
Weight: 610, 590, 570, 550 kg
The TLGA flail is a piece of equipment used for the shredding of shrubs near ditches, banks and orchards. The TLGA equipment can work both sideways and as a common mulcher thanks to the booms that allow ...
LI.PA. Srl
Cutting width: 132, 162, 192 cm
... heavily overgrown terrain. The arrangement of the working bodies (hammers) is in a double spiral, which saves energy consumption by up to 24% and puts less strain on the vital parts of the mulcher. Standard ...
Cutting width: 105, 125, 155, 180, 200 cm
Rotational speed: 540 rpm
Tractor power: 20 ch - 50 ch
Mulchers consist of a horizontal rotor equipped with cutting blades of different shapes, i.e. hammer or knife shape. They are driven by an integrated power take-off connected to the tractor via a cardan ...
Breviglieri SpA
Cutting width: 1.6 m - 6 m
Rotational speed: 540, 1,000 rpm
Tractor power: 87, 170, 250, 145, 300 ch
... carefully studied in order to satisfy the most demanding customers. Built in widths from 1.60 to 4.00 m with a single rotor and 3.20 m to 6.00 m with twin rotors, the mowers benefit from the fact that they are balanced ...
Quivogne
Cutting width: 140 cm - 240 cm
Rotational speed: 540 rpm
Tractor power: 35 ch - 110 ch
The model BVE permits to obtain a higher grass crumbling than the model BPEL. The BVE model is advised for mulching grassy mantles, runners and stones until 6 – 7 cm of diameter in orchards. The hitch is available with manual or hydraulic ...
Facma
Cutting width: 150, 175, 200, 225, 250 cm
Tractor power: 50, 60, 65, 70, 75 ch
Weight: 530, 585, 610, 685, 725 kg
... plated rod side-shift by threaded bar •Side skids •Side guards (when wheels available) •Rotor (Ø 168 mm pipe) with flat hammer (Ø 430 mm ÷ Ø 440 mm) •Resting foot •Double shielded box frame •Drive shaft without safety device
Cutting width: 1,582, 1,342, 1,102 mm
Weight: 880 kg - 1,100 kg
Forestry mulcher with fixed tooth rotor (UML/HY) or swinging hammer rotor (FML/HY) for excavators. With its updated design, the UML/HY has increased its strength and durability. The addition of the ...
Cutting width: 120 cm - 220 cm
Rotational speed: 540 rpm
Tractor power: 25 ch - 65 ch
... jack that allows for the side shifting of the machine directly from the tractor. Available with different type of knives or hammers. Rear roller and skids.
SOVEMA
Cutting width: 100 cm - 200 cm
Tractor power: 14 ch - 40 ch
Weight: 150 kg - 260 kg
Hammers, for grass and wood up to 2 cm Standard equipment • 3-point hitch CAT.1 fixed with two positions (except for model TRD 100) • Rear roller • Cardan joint Safety • Front rubber protection • Side skids • ...
Cutting width: 130 cm - 200 cm
Rotational speed: 540 rpm
Tractor power: 35, 40, 70 ch
... OPTIONAL REQUESTS •Cardan joint •Blades in place of smooth hammers •Hammers (T02284) and smooth hammers (T01123) model TR10/TR10V, complete with reinforced rotor and counter hammers •2 ...
Tortella srl
Cutting width: 80, 93, 106, 132, 158 cm
Tractor power: 12 ch - 30 ch
Weight: 130, 139, 146, 170, 195 kg
... BLADES, SPATULAS OR HAMMERS •ADJUSTABLE REAR ROLLER (3 POSITIONS) •UNIVERSAL PTO SHAFT CATEGORY 2 OPTIONAL •Rotor with Y blades for universal use- grass •Rotor with spatulas for specific use- grassland •Rotor ...
Del Morino
Cutting width: 1.8 m - 2.4 m
Rotational speed: 540 rpm
Tractor power: 52 kW - 75 kW
FMH series are rear mounted,PTO driven flail mowers for tractors. working width varies from 1,800 to 2,400mm,power demand 70-100HP.FMH series can be typically aggregated with tractors with 3-point hitch of Cat.Ⅰ or Ⅱ.Flail ...
Jiangsu AWON Machinery and Equipment Co.,Ltd
Cutting width: 1.94, 2.14, 2.3, 2.49 m
Tractor power: 80 ch - 180 ch
Weight: 1,170, 1,205, 1,240, 1,275 kg
Cutting width: 860, 1,200, 1,080, 970 mm
Rotational speed: 540 rpm
Tractor power: 10 ch - 20 ch
3-point hitch mounted shredder, ideal for small tractors ranging from 10 to 20 HP. Mainly recommended for the maintenance of parks, gardens and small green areas. STANDARD EQUIPMENT • Adjustable support roller ...
ZILLI
Please specify:
Help us improve:
remaining