22 hammers mulchers

Cutting width: 150 cm - 260 cm
Rotational speed: 540, 1,000 rpm
Tractor power: 50 ch - 90 ch

GOLDSTRONG is the Hardox series flail mower, specifically for tractors with 50 to 90 horsepower (min). The application is rear. The special Double Hardox frame, the three rows of counter-knives, the oversized rotor, the ...

Cutting width: 1.6, 1.8, 2 m
Rotational speed: 540 rpm
Tractor power: 45, 50, 70 ch

... balanced rotor with hammer blades that allows extremely easy rotor operation. It also enables a smaller source of vibrations and minimal deformation, which prolongs the life of the mulcher. The ...

Cutting width: 180, 200, 220, 240 cm
Tractor power: 35 ch - 85 ch

... • Adjustable tensioner • Side skids • Universal 3-point hitch of I cat and II cat. • Cardan support • Equipped with hammers • Toothed counter-blade • Box 50-80 HP • Rear opening for inspection • CE safety protection

Cutting width: 1.6 m - 6 m
Rotational speed: 540, 1,000 rpm
Tractor power: 87, 170, 250, 145, 300 ch

The manufacture of QUIVOGNE mowers has been carefully studied in order to satisfy the most demanding customers. Built in widths from 1.60 to 4.00 m with a single rotor and 3.20 m to 6.00 m with twin rotors, the mowers benefit from the ...

Cutting width: 140 cm - 240 cm
Rotational speed: 540 rpm
Tractor power: 35 ch - 110 ch

The model BVE permits to obtain a higher grass crumbling than the model BPEL. The BVE model is advised for mulching grassy mantles, runners and stones until 6 – 7 cm of diameter in orchards. The hitch is available with manual or hydraulic ...

Cutting width: 150, 175, 200, 225, 250 cm
Tractor power: 50, 60, 65, 70, 75 ch
Weight: 530, 585, 610, 685, 725 kg

... plated rod side-shift by threaded bar •Side skids •Side guards (when wheels available) •Rotor (Ø 168 mm pipe) with flat hammer (Ø 430 mm ÷ Ø 440 mm) •Resting foot •Double shielded box frame •Drive shaft without safety device

Cutting width: 1,300 mm - 2,800 mm
Weight: 460 kg - 1,390 kg

... Standard equipment – CE safety guard – Rear hitch – Adjustable Rear Roller – Roller scraper – Multiplier with freewheel – Hammers – Right side without protrusion – Hopper with hydraulically operated opening door – ...

Cutting width: 135 cm - 250 cm
Rotational speed: 540 rpm
Tractor power: 40 ch - 100 ch

Cutting width: 160 cm - 285 cm
Rotational speed: 540 rpm
Tractor power: 70, 95 ch

... take-off P.T.O.540 rpm •4- belts •Jags for wood collection OPTIONAL REQUESTS: •Cardan joint •Hammers in place of smooth hammers •Blades in place of hammers •2 point linkage bracket •Shifting ...

Cutting width: 144 cm - 264 cm
Rotational speed: 1,000 rpm
Tractor power: 50 ch - 120 ch

... WITH ADJUSTABLE TENSIONER •ROTOR WITH HAMMERS OR BLADES •ADJUSTABLE REAR ROLLER •ADJUSTABLE SKIDS •UNIVERSAL PTO SHAFT CATEGORY 6 OPTIONAL •Rotor with Y blades for universal use- grass •Rotor with hammers ...

Cutting width: 1.65 m - 2.05 m
Rotational speed: 540 rpm
Tractor power: 37 kW - 52 kW

FMH series are rear mounted,PTO driven flail mowers for tractors. working width varies from 1,650 to 2,050mm,power demand 50-70HP.FMH series can be typically aggregated with tractors with 3-point hitch of Cat.Ⅰ or Ⅱ.Flail ...

Cutting width: 1.94, 2.14, 2.3, 2.49 m
Tractor power: 80 ch - 180 ch
Weight: 1,170, 1,205, 1,240, 1,275 kg

Cutting width: 50 cm - 120 cm
Rotational speed: 540 rpm
Tractor power: 20 ch - 30 ch

Rear shredder ideal for grass and vine shoot with a cutting diameter max. Ø 2 cm. Designed for tractors from 20-30 hp 15-22 kW. Provided with three-point hitch and reversible gears box, of mechanical lateral movement ...

Cutting width: 1,105, 1,255, 1,355, 1,455, 1,555 mm
Tractor power: 20 ch - 60 ch
Weight: 225, 240, 250, 260, 270 kg

SHREDDER SUITABLE FOR GRASS AND SMALL BRUSHWOOD MAX DIA.2 CM ● OVERGEAR WITH INSIDE FREE WHEEL ● THREE-POSITION MANUAL MOVEMENT ● ADJUSTABLE Ø 140 ROLLER ● CARDAN SHAFT ● STONEGUARD STRAPS ● SLIDE PAIR ● CE STANDARD ACCIDENT PREVENTION GUARD

Cutting width: 220, 240, 260, 200 mm
Tractor power: 45 ch - 100 ch
Weight: 730, 775, 655, 685 kg

Dimensions(mm): 2188×1010×1115, 2388×1010×1115, 2588×1010×1115, 2788×1010×1115 Cutting height (mm):10-70mm Rotor diameter (mm):159 Belts no: 5

Cutting width: 1,600 mm - 2,800 mm
Rotational speed: 540 rpm
Tractor power: 48 ch - 135 ch

... Helicoidal hammers rotor. – Third pulley tensioner, bolt adjustable. – Rear roller 220 mm diameter with scrapper. – Support with protection for rear roller bearings. – Smooth side, hub located inside the machine. – ...

Cutting width: 200, 180, 220, 160, 250 cm
Rotational speed: 540, 1,000 rpm
Tractor power: 70, 80, 90, 100, 120 ch

... high performance in the field. It can be used both in front and rear configurations, providing flexibility in operation. The mulchers is designed to be used with tractors ranging from 70 to 120 HP. Standard equipment -Three-point ...

Cutting width: 120 cm - 190 cm
Rotational speed: 540 rpm
Tractor power: 50 ch - 100 ch

... between 50 and 100 HP. The sturdiness and quality of the flail mower allows you to carry out highly difficult jobs while maintaining a constant hourly production. The entire range has hammers arranged ...

Cutting width: 1,600, 2,400, 2,200, 2,000, 1,800 mm
Tractor power: 60 ch - 120 ch
Weight: 667, 636, 594, 520, 717 kg

hydraulic displacement rear hatch up to 3.200 mm. made from SWEDISH STEEL Mulcher designed for medium and high-power tractors. Specially for working on grass, vine shoots, pruning waste, etc. Maximum ...