5-shank subsoilers

Width: 250, 300 cm
Working depth: 50 cm

Subsoiler A processes the soil deeply without overturning it. It is suitable for the shredding of large clods and for use in difficult soil conditions. By reaching the lower layers of the soil, it increases water and ...

- Adjustable tines on frame - Safety bolt Optional: depth wheel couple, double spiketooth roller, wheeled forecarriage, exploders

Width: 1.5 m - 3.5 m
Working depth: 0.6 m - 0.8 m

... Series Subsoiler: 1- FI-SSB5/250 Subsoiler: The main subsoiler, designed to perform efficient soil subsoiling, promoting aeration and breaking up compacted layers. 2- ...

Width: 1.5, 1.8, 2, 3 m

Width: 2.35, 1.35 m
Working depth: 600 mm

Width: 2,500, 3,000, 4,000, 5,000 mm

The characteristics of our subsoilers are the following: they plough deeply – they break the compressed layers – they maintain the organic equilibrium – they help the drainage of water – they oxygen the soil – they prevent ...

Width: 130, 140 cm
Working depth: 40 cm

RABBIT hydropneumatic subsoiler is a machine suitable for tracked tractors and rubber-tired tractors with isodiametric wheels (equal) with power ranging from 60 to 90 HP; very versatile machine used to work, with 3 or ...

Width: 70, 950, 1,850 mm
Working depth: 610 mm

Landforce Sub Soiler is a tractor mounted implement used to loosen and break up soil at depths below the level of a traditional disk harrow or rototiller. Benefits Landforce Sub Soiler is a farming ...

Width: 3 m
Working depth: 15 cm - 45 cm

The Equalizer Aerator Ripper is used for soil aeration and the conditioning of land. The Aerator Ripper has the ability to aerate your land up to a depth of 300mm with minimal topsoil disturbance. Optional ...

Width: 2.7, 3, 4.5 m

... to graze which in turn effects forage requirements and productivity. This is where the OPICO Sward Lifter Grassland Subsoiler can help. The Sward Lifter with its rugged construction is specifically designed to break ...

Width: 22'00", 15'00", 17'00", 11'00"
Working depth: 8 in - 20 in

6│DT Subsoil Ripper Eliminate yield-robbing, root-zone compaction, increase soil porosity and utilize deeper soil moisture and nutrients The Orthman 6|DT subsoil ripper is designed as a soil conservation ...

Width: 250, 350, 450, 550, 650 cm
Working depth: 50, 60 cm

Third point 2 cat. Antiwear anchor protection. Reversible chisel. Depth of anchors 20-50 cm. Distance anchor 50 cm.

Working depth: 30 cm

Available in 5 or 7 teeth configurations, the bed decompactor works in-depth (approximately 30 cm). It breaks up the hard undersoil to allow water to infiltrate and ensure better soil ventilation.

Width: 3.2, 2.4, 5.6, 4.2, 1.4 m
Working depth: 600, 450 mm

It has got a very heavy strong structure which can reach the best performance in every soil even in combination with high power tractors.

Width: 2 m - 3.57 m
Working depth: 30 cm - 62 cm

Asa Laser subsoiler soil operations are vibrating. This feature increases soil decompaction between the crop rows and reduces the required power of up to 10% in relation to other subsoiler equipment. ...

Width: 1.4, 0.7 m

Width: 54, 66, 78, 90 in

A cultivator is a farm implement for stirring and pulverizing the soil,either before planting or to remove weeds and to aerate and loosen the soil after the crop has begun to grow. It is powered by a tractor and stirs the soil.usually ...

Width: 1.8, 2, 2.2 m

Scarifiers Chisels Wide clearance rigid tines with safety.

Width: 2.5 m - 3.5 m
Working depth: 0 cm - 50 cm

... and impacts. The safety bolt shear resistance of the tines during driving is 650 kg. Safety Bolt for Tines The Atlas Subsoiler offers uninterrupted driving with a load of up to 650 kg. To prevent the robust tines ...

Width: 350, 280, 210 cm

... Agricultural tillage machinery are Rotary Tiller、Reversible Plow、Disc Harrow、DiscPlow、Hole Digger、Subsoiler etc. Rake Center Distance - 79cm - 81cm - 87cm No.of Rake - 5 - 4 - 3 Working Width - 350cm ...

Width: 1,500 mm
Working depth: 270 mm - 350 mm

Motive power:30 - 45hp Tractors 3-point suspension:Cat.1 Length:360mm Height:1050mm Weight:100kg Working width:43mm

Width: 2.4, 2.9 m

With increased light frame equipped with a manual circuit loading pump. -HYDROPNEUMATIC -INCREASED LIGHT FRAME

Width: 2 m - 5 m

... between the tines: from 400mm to 1000mm. - work width 2 and 3 tine width up to 2,4m - work width 4 and 5 tine width up to 3m - No. of tines: from 2 to 5 - 900mm clearance under the frame - rear mounted ...

Width: 200, 250, 360 cm
Working depth: 60 cm - 80 cm

- Pair of wheels depth-adjustable support - Mechanical system for side blades Reentry (only for RIP.7) - Hydraulic system for side blades Reentry (only for RIP.7)