Centrifugal pumps

Flow: 30,000 l/h
Pressure: 5 bar

... LOMBARDINI DIESEL 15 LD 350 Pump: CENTRIFUGA S3 Hose: 1,5″ (40 mm.) MAX. height (pressure): 50 m. (5 BAR) Consumption: 2,1 L/H Tank: 4,3 L. Weight: 52 kg. Starter: hand start Dimensions: 550 x 450 x 550 mm. Water ...

Dagso’s water pumps for agriculture are designed to withstand tough loads and deliver the highest efficiency. Pumps from the Robusta line have reinforced internal walls and are also able to handle ...

... submersible well pumps are multi-stage centrifugal type and designed for best efficiency. Components are manufactured from high grade non-magnetic corrosion resistant 304/316 Stainless Steel. These ...

Our centrifugal mutlistage electropumps are silent, efficient, can be used and installed in water supply systems, washing, fire protection, conditioning and cooling systems, irrigation and pressure boosting. They are ...

Flow: 3,500, 6,500 l/min
Power: 24, 60 kW

Garda Evo is a combined group that drives two outputs (rotary blade pumps, blowers, centrifugal pumps, high pressure pumps and rotating shafts) either alternated (1 lever ...

Flow: 583 l/min
Power: 4.8 kW

Diam. Suction - 50 mm (2”) Diam. Discharge - 50 mm (2”) Suction head (m) - 7 Total head max (m) - 30 to zero capacity Starting system - Recoil Oil alarm device - Yes Fuel tank capacity (Lt) - 2,6 Dry weight (Kg) - 24 Accessories kit - Yes

Flow: 4,600 m³/h
Pressure: 25 bar

Volute casing pumps acc. to ISO 5199 Single Stage Pumps – LS, LC Horizontal single stage endsuction pump with closed impeller and oil lubricated bearing frame. Process design, back ...

Flow: 7,200 l/min - 12,000 l/min
Pressure: 2.5, 2.4, 4.5 bar
Power: 15 ch - 30 ch

... starting up and changing operation. All pumps have the gear/ engine coupled directly to the pump shaft. This ensures maximum power transfer to the impeller and also reduces your maintenance costs. ...

Flow: 68 m³/h
Pressure: 3 bar
Power: 11 kW

Product Description Unlike the compressed type of manure pumps in the market, Naras manure pumps is a lobed type pump and is easy to clean. Through that it resists corrosion, it works ...

Flow: 22,500 l/h
Pressure: 1, 2.5, 5 bar

... Taine® pump is a solenoid-coupled centrifugal pump. Thanks to the solenoid coupling, the pump transports the liquid medium from storage tank to storage tank without any ...

Power: 0.8 ch

... The milk pump is permanently installed below the Milk receiver. The 0.75 hp Milk pump is a shelf cleaning type and has been engineered and manufactured exclusively from stainless steel parts. It consists ...

For weed control and spraying treatments in small and medium dimension crops, parks, gardens, vegetable plots, greenhouses or for water soluble detergent or paint distribution PETROL ENGINE Gearbox coupling or speed reduction pulley ELECTRIC ...

Flow: 1,225 m³/h
Pressure: 2.7 bar
Power: 60 kW

The Superjet 3-Point Linkage Slurry Pump is a high capacity pump with options of 5”, 6” and 8” pipe work. Fitted with a high capacity drum, the Superjet 3-Point Pump enables high volumes ...

Flow: 1,200 l/min

Centrifugal pump available in cast iron (glass filled nylon impeller) or Stainless Steel (glass-filled polypropylene impeller and Life Guard silicon carbide mechanical seals). Compact design. Driven ...

Flow: 70 m³/h - 140 m³/h
Pressure: 3, 5 bar

It is a portable type manure pump which can be driven by a tractor or electrical motor equipped with a special rubber rotor. It can pump high dry matter containing manure and liquids up to 5 bars. Type ...

The HyPump is an innovative water pump that pumps water without fuel or electricity using the energy of flowing canals to irrigate the fields of commercial farms. It can pump up to ...

Flow: 0 l/min - 5.8 l/min
Pressure: 0 mbar - 280 mbar

... of the pump enables low-cavitation operation. High media temperatures of up to 96 °C are therefore possible without significant loss of pump performance. To increase the maintenance intervals, a low-wear, ...

Flow: 5,000, 11,137 l/min

... high pressure-centrifugal pump with a ceramic-mechanical axle seal. On top of that, the pump has a pre-cutting knife for cutting up straw and feed residue. To start up the pumping ...

Flow: 60 m³/h - 10,000 m³/h
Power: 89 kW - 298 kW

1.Dredge pumps are designed to be able to work in the harshest environments. The dredge pump and mining pumps are suitable for pumping and handling all slurry, mud, sand, gravel, rocks ...

Pressure: 3.2 bar
Power: 900 W

... hour from wells, reservoirs and cisterns. The pump has a robust pressure connection with a stainless steel insert. The sturdy pump housing of the GC-PP 900 N is made of corrosion-resistant stainless steel ...

Flow: 18 m³/h

Well Desinged, Long life, Robust frame, Cast Iron Impeller, Light Aliminium Body, High Performance

Power: 4.2 ch

... Payment Terms: L/C, T/T Power: Engine Start Up: Cdf Type: Jet Pump Application: Irrigation Industry: Irrigation Pump Media: Sewage Pumps Performance: Automatic Pump Theory: ...

About centrifugal Slurry Pumps Our centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing ...

Flow: 0 us gal/min - 190 us gal/min
Pressure: 0 psi - 45 psi

2" Cast Iron Pump Wth 5.0 HP Three Phase Electric Motor Standard Lead Times Family:Pumps Type:Cast Iron Style:Electric Motor & Pump Size:2" Weight180.0 lbs - “V” shaped ...