Field cultivators with rollers

Width: 650, 550, 830, 750 cm

Kongskilde Vibro Master 3000 is a fully mounted seedbed cultivator equipped with vibrating tines in working widths from 6,5 up to 8,3 m, for tractors up to 250 hp.

Width: 3 m - 5.3 m
Working depth: 2 cm - 30 cm

High performance tine spacing Thanks to feedback from farmers, unlike the competition Grégoire Besson offers unique tine spacing (distance between each tine) of 230 mm. This choice gives the machine more versatility, allowing it to ...

Width: 4, 3, 3.5 m

... by a comb harrow located just behind the two rows of discs. The roller provides soil firming before the passage of the drilling elements (choice of Packer 550, Gravity or Tracker roller). The XR makes ...

Width: 299 cm - 398 cm

... is particularly important when using the cultivator with track guidance systems. For catch crop sowing, the Karat 10 can be combined with the SeedHub catch crop seed drill. Advantages of three-beam cultivator ...

Width: 425, 625, 825 cm

Spring Cultivator tills the soil on the surface and it does not disturb deep layers. It is generally used for flatten the surface for smoother surface. It prepares the seedbed after primary tillage. It breaks the weeds ...

Width: 3, 4.5 m

... combination is ideal for intensive seedbed preparation, even on heavy soils. And so variable that it can also be used also as a field roller.

Width: 6, 4, 5 m

Small but mighty. The Degelman narrow transport series offers the same engineered tough, rugged build as its big brothers, but with a transport width under 10’. This allows the Pro-Till to safely travel in areas with narrow roads and ...

Width: 59.1 in
Working depth: 0 in - 4 in

... up to 4 in depth. Working depth can be adjusted by adjusting the height of the rear field roller. Compared with the horse arena harrow, the spring tine cultivator goes deeper in the ...

Working depth: 16 in

8 Row Cultivator built to soften and fluff the dirt for best watering conservation. Softer Dirt, Better Growth Aerate and soften dirt with the ripper. Potato plants like to grow where soil is less compacted. Cultivators ...

Width: 4.1, 7.6, 9.1, 10.7, 12.2 m

... asked us to design a machine to better handle the high level of residue at depths equal to or deeper than a conventional disc harrow but be able to operate at speeds around 10 MPH. These machines need to be able to cut ...

Width: 2.5, 2.7, 3, 4 m
Working depth: 4 cm - 13 cm

... rack for seed drill B1 - Mandatory equipment •roller (availabity of rollers on the bookmarker ROLLERS) HIGH SAVINGS DUE TO THE COMPACT DESIGN Each of the AS aggregate series is ...

Width: 6.63 m - 13.94 m

... range. The Ultra-Chisel’s rocking bolster system on the center rockshaft ensures even, steady depth control in undulating field conditions, offering unmatched depth uniformity when compared to other large tillage tools ...

Width: 4, 3.5, 3 m
Working depth: 25 cm

The 3-4m tine cultivator Cultus 300-400 has powerful tines working down to 25cm depth. You benefit from a spacious frame construction offering impressive mixing capabilities. Cultus is the ideal cultivator ...

Width: 2.1, 2.5, 1.7, 2.9, 3.4 m

... simplicity strength and efficiency make this implement essential. The springtine cultivator’s work can be completed by adding a roller, a following harrow or a levelling board. It is up to you to concoct ...

Width: 7.01, 6.4, 5.79, 7.62 m
Working depth: 0 m - 0.2 m

Strength, durability, and performance are standard features on Salford field cultivators. Hydraulic self-leveling frames and fine-adjust single-point depth control are also standard features. Capped, ...

Width: 3.2, 4, 5, 6 m

... breaking roller (on series with double star discs) mounted on swiveling supports, double conical bearing system ma/ag. • Stabilizer, leveler rear roll, indispensable to obtain a perfect result. At demand, cage, paker, ...

Width: 12,000, 10,000 mm

... Carried PLANO MP seedbed cultivators: the characteristics -Tined leveling bar, mechanically adjustable, to level rough irregularities -One cage roller dia. 500 mm -4 rows of flex springs 32x12 with ...

Width: 2.95, 5, 6 m
Working depth: 0 mm - 150 mm

... frame using coil tines allowing for a variety of different points to be used. These are followed by a full width ‘V’ ring roller to leave a level finish. Removable scraper arms allow for quick replacement and to aid ...

Width: 3 m

•Three point linkage cat. : 2° - 3° •Shear bolt safety device •Hardened steel point •Couple of lateral wings •Soil guide plate •Hydraulic working depth •Concave levelling discs with shock absorber •Tine with inclination adjustment

Width: 3 m - 9 m

... frame This guarantees accurate copying land and uniform cultivation. Low rolling resistance of the front shaft A string roller with a large diameter of ø400 mm holds working depth and perfectly crushes large clods ...

Width: 300 cm - 580 cm
Working depth: 20 cm - 35 cm

PRODUCT DESCRIPTION // TYPE CULTIVATOR - COMBINED PREPARER

Width: 2,150 mm - 5,900 mm
Working depth: 10 cm - 15 cm

The SEGUÉS CBF SOIL CULTIVATORS are the suitable implement for the shallow soil layers and stubble mixing. Duet to the low working depth (10-15 cm) and to the tines “VIBRO” effect, we reach an uniform mix saving the soil ...

Width: 300 cm
Working depth: 250 mm - 300 mm

DOMINANT SERIES TRAILED TYPE MULTI DISC HARROW & CHISEL PLOUGH WITH T TYPE ROLLER COMBINATION

Width: 300 cm - 800 cm
Working depth: 30 cm

... used at the rear, optional disc diameters of 51 and 56 cm, disc thickness of 4 mm, disc spacing of 24.5 cm. ROLLER: Seven different roller options are available, depending on user preference. It can ...

Width: 110 cm - 295 cm
Working depth: 15 cm - 25 cm

Spring tine cultivator “CM” with special supports “Stone-Jumper” of working groups equipped with antishock springs, the frame is width adjustable and cylinder for vertical hydraulic lifting available in order to reduce ...