- Farm Machinery >
- Hay & Forage >
- Front mower
Front mowers
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Working width: 2.55 m
Power required: 75 ch
PTO speed: 1,000 rpm
The new Sarracenia front mowers, with a 2.60 or 3.20 m cutter-bar, are fitted with an innovative ground tracking system that reduce impacts and stresses on uneven terrain. This guarantees optimal cutting ...
Working width: 3.24 m
Power required: 90 ch
PTO speed: 1,000 rpm
The new Sarracenia Front Mower, with a 3.20 cutter-bar, are fitted with an innovative ground tracking system to reduce impacts and stresses on uneven terrain. This guarantees optimal cutting and the reduction ...
Working width: 160 cm - 180 cm
Power required: 15 kW - 27 kW
PTO speed: 2,000 rpm - 3,000 rpm
The front flail mower mod. TEG SPECIAL has been engineered for fitting on front tractor PTO as: - John Deere mod. F1435-1445-1565-1551-1570-1580 - Kubota mod. F3560-F2880-F3680-F3990 The ...
PERUZZO Srl
Working width: 1,400, 1,200, 1,500 mm
Power required: 13 kW - 44 kW
PTO speed: 540 rpm - 2,000 rpm
The front flail mower mod. SCORPION is suitable for fitting on front tractor 3 point linkage or "A-triangle" linkage. The fornt flail mower Scorpion is used for grass ...
PERUZZO Srl
Working width: 1,800, 1,200, 1,500, 1,400 mm
Power required: 19 kW - 30 kW
PTO speed: 540 rpm - 1,000 rpm
The PUMA flail mower is used for cutting grass (mulching), small pruning cut (max. 2 cm of diameter) and for verticut action on grass fields. Engineered for working on wide grass areas. The same machine can be fitted ...
PERUZZO Srl
Working width: 300 cm
Power required: 90 ch
Swath width: 180 cm
... designed for all cutting bars in our range of mowers. It allows a quick and clean cut. Lightening spring In all mounted mowers there are lightening springs that allow the load to be transferred from ...
Working width: 3.2 m
Power required: 60 kW - 90 kW
Swath width: 1.2 m - 1.8 m
Finally, a front mower conditioner with all the benefits of a trailed mower conditioner! The ELHO NM 3200 F front mower conditioner offers power, good ...
Working width: 3.7 m
Power required: 70 kW - 100 kW
Swath width: 1.2 m - 1.8 m
World’s widest front mower conditioner The ELHO NM 3700 F is the world’s widest single-beam front mower conditioner. With a cutting width of 3.7 metres, this model ...
Working width: 3.3 m
Power required: 60 kW - 90 kW
PTO speed: 750, 1,000 rpm
A front disc mower with suspension that produces clean forage! The ELHO NK 3300 Front features the Pendulum Center System (PCS), which enables the mower conditioner ...
Working width: 11 m
... of upright food •Tractors with big external width can be used without any problems due to the fact that the food is cut in front of the tractor. •Comfortable Handling •With the recently developed Joystick BB-Umwelttechnik ...
BB-Umwelttechnik
Working width: 9.6, 10.1 m
... for groupers. The series includes the following butterfly mowers: Thanks to a pendulum travel of -19° to +26°, the mower works precisely even in undulating terrain. Using two pins, the mower ...
AGCO GmbH
Working width: 2.8, 3.11 m
Power required: 32, 43 ch
Swath width: 0.9, 1.3 m
... a highly nutritional forage. KUHN GMD 100 F series front disc mowers, with 2 models, are a must with their assets which will make the difference on your farm! The GMD 100 F series front ...
KUHN S.A.
Working width: 3.04, 2.62, 3.46 m
Power required: 60, 55 ch
Swath width: 1.1 m - 2.6 m
With our NOVACAT CLASSIC front mowers, mowing is smooth and cost effective. The NOVACAT CLASSIC series is the ideal mix of low weight and the highest strength. You can safely use these mowers ...
PÖTTINGER Landtechnik GmbH
Working width: 315, 355 cm
Power required: 82, 95 ch
•JF cutterbar, strong and reliable with integrated stone guard. •Quick change knife standard, reduced service time. •Contour Float, perfect ground following and optimal cutterbar protection. •Can be used with reverse-drive tractors.
Working width: 2.16 m
Power required: 40 ch
Swath width: 0.9 m - 1.1 m
... The DISC 220 F ALP front mower is a lightweight and robust mower designed for work on steep, uneven, hilly and mountain areas. The mower is incredibly agile and efficient. ...
SIP STROJNA INDUSTRIJA d.d.
Working width: 2,550 mm
... pairs enables high forage throughput and a compact swath. Low load for the tractor Due to the compact linkage on the FP mower, the centre of gravity is very close to the tractor. This results in a low load for ...
FELLA AGCO Feucht GmbH
Working width: 3,570 mm
Power required: 44 kW
Swath width: 1,030 mm - 1,830 mm
Disc mower PRONAR PDF301 is a front disc mower which is mounted on the tractor’s three-point linkage. The mower requires PTO at the front of the tractor ...
Pronar Sp. z o.o.
Working width: 3 m
... uniform swath - Higher output - Optimum transport position - Greater visibility - This sleek front mower is specially designed to provide a clean cut and optimum output. Standard Features on the ...
Working width: 2.6, 3, 3.4, 3.9 m
... More than 20 years of experience in manufacturing disc mowers Own design of PerfectCUT cutterbar tested on markets across the world 2-year warranty Farmers’ trust More than 4 000 KDF mowers working ...
SaMASZ Sp. z o.o.
Working width: 2,850, 2,450, 2,050 mm
Power required: 54, 48, 40 ch
Weight: 450, 490, 530 kg
Range of lightweight front-disc mowers, ideal for mowing fodder in the mountains and, in general, on steep slopes. The minimum power absorption at PTO means that the Rotex Edelweiss can also be applied ...
BCS
Working width: 2.1, 2.45, 2.85 m
Power required: 45, 52, 60 kW
PTO speed: 1,000 rpm
... Direct Transmission All our front-mounted machines feature direct transmission from the gearbox to the cutting bar. FRONT-MOUNTED MOWER CONDITIONERS F-FRD/R AND F-FRD/F SERIES All ...
Galfre
Working width: 105 cm - 202 cm
Power required: 15 ch - 50 ch
PTO speed: 540, 2,160 rpm
Front shredder with reinforced structure that make it suitable for heavy work in the most varied conditions both on grass and on branches. STANDARD EQUIPMENT: 3-point linkage Cat. 1 including side offset at two positions ...
Working width: 80 cm
Weight: 52 kg
Speed: 2.5 km/h - 4 km/h
Our rotary mower is synonymous with speed, robustness and precision. Its oval shape and wheels adapt perfectly to the ground, making it easy to steer when mowing. It works on the principle of a rotary blade, ensuring ...
Working width: 60 cm
... swinging arm to mow around trees, posts and other obstacles. The SZF and SZL models are mounted onto the front of the tractor with a mounting plate; A front linkage is not necessary. The swinging arm, ...
PERFECT - VAN WAMEL
Working width: 2.4, 2.8 m
Power required: 80, 70 ch
Weight: 745, 520 kg
The new hydraulic front mowers complete the Bellon’s range with the disc series DFH. They are equipped with the new system of hydraulic balancing that allows to constantly regulate the pressure to the ...
BELLON S.r.l.
Working width: 2.4, 1.75, 1.9, 2.8, 3 m
Weight: 350 kg - 790 kg
Bagues
Working width: 9.5 m
... butterfly mower-conditioner is the ideal solution for high capacity grass mowing and harvesting, when used in conjunction with a front mounted mower. The cutting width of the KM-600B ...
Keltec Engineering
Working width: 500, 560, 1,000, 650, 800 mm
Power required: 8 ch - 16 ch
Weight: 68, 63, 105, 76, 59 kg
Adjustable pivoting wheels without supporting roller (only front version) Adjustable pivoting wheels with supporting roller (only front version) Set of hammers instead of Y blades for Automatic ...
CERRUTI s.r.l.
Working width: 10, 9.1, 8, 7.3 m
Weight: 680 kg - 1,160 kg
... via an operating terminal. In addition, the mowers have an automatic headland control, which makes operation easier. The DM Butterfly is available as a front-mounted model or in the resolved version ...
F.X.S. Sauerburger Traktoren und Gerätebau GmbH
Working width: 2.61, 4.3, 5.99, 7.68 m
Power required: 70 ch - 200 ch
PTO speed: 1,000 rpm
Float Wing Mulching Mower, for tillage field residues, open green space areas and animal field grass management. Standard features include overlapping blades, three-point linkage, with two, three, or four blade cutting ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how AgriExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining