Hydraulic mulchers

Cutting width: 600 mm - 1,000 mm
Tractor power: 70 ch - 120 ch

... growth of weeds in orchards and olive-yards. It has an independent hydraulic tank, installed behind the tractor. The machine is available in two versions, one with an automatic hydraulic sensor wire allowing ...

Cutting width: 120 cm - 190 cm
Rotational speed: 540 rpm
Tractor power: 50 ch - 100 ch

... TS flail mower equipped with a "Pick-up" rotor is a semi-mounted machine applicable to the three points of the tractor's hydraulic lift. Thanks to the presence of the "Pick-up" rotor, it collects any pruning residues ...

Cutting width: 1,000, 1,300, 1,200, 1,400 mm
Tractor power: 15 ch - 50 ch
Weight: 285, 265, 350, 300 kg

... STEEL Mulchers designed for low-power tractors, they finely shred grass, vine shoots and pruning waste up to a maximum diameter of 3 cm. They finely shred grass, vine shoots and pruning waste up to a maximum diameter ...

Cutting width: 130 cm - 225 cm

The ecomower is ideally suited for the maintaining of rough vegetation such as at road verges. The ecomower mows the vegetation by means of a rotating rotor with ‘loose’ hung flails attached to this. Through the rapidly rotating flails, ...

Cutting width: 1.8 m - 3 m
Tractor power: 55 ch - 100 ch

• Rotor Ø from 1,80 to 2,40 m: 180 mm • Rotor Ø from 2,60 to 3,00 m: 220 mm • Number of RPM: 1850 • Three point linkage cat. 2 • Centralised greaser • Automatic belt tightener • no. 2 counter-knife • Gearbox with ...

Cutting width: 1.4, 1.6, 2 m
Rotational speed: 1,000 rpm
Tractor power: 150, 60 ch

... the most challenging conditions. Other key features are a hydraulic opening hood and an adjustable push frame which work together to ensure that material is channeled efficiently into the mulcher. The ...

Cutting width: 200, 180, 160 cm
Tractor power: 100, 90, 80, 70, 60 ch

The TLI SENIOR SE is the right machine for the large farm or contractor that needs a robust machine and able to reach every point of the ground. This version has hardened pins and bushings that provide maximum durability

Cutting width: 1,300, 1,500, 1,800, 2,000, 2,250 mm
Rotational speed: 1,000 rpm
Tractor power: 40 ch - 130 ch

... hammers for a long life and heavy work. rear door guard with hydraulic opening. Steel skig with a depth regulation. Standard equipment: Freewheel included in the group Wear plate rotor. Hydraulic ...

Cutting width: 1.4, 1.6, 1.8, 2, 2.2 m
Tractor power: 50 ch - 150 ch

... gear box. The rotation of KB Series is 90° (and 65° in case of slope). • Cutting widths 1,4/ 1,6/ 1,8/ 2,0/ 2,2m • The hydraulic sideshift • Head rotation +90˚ / -65˚ • The mechanical breakaway • Ground-roll hands ...

... protection. · Coupling to tractor Cat. I & II. · Side skids and inside rear roller. · Hydraulic discharge to the ground of the loading compartment. · Hydraulic hoses with external cover against sratches ...

Cutting width: 45, 56 in

... teeth to fit the application– reversible, beaver, concave, or carbide. Simple and easy to use, only using 3 hydraulic lines – 2 additional hydraulic lines are required for the optional rotator.

Cutting width: 1,600 mm - 2,400 mm
Tractor power: 40 ch - 120 ch

... and pruning residue, thanks to the robust structure and equipment. The machine can be moved sideways with a mechanical or hydraulic system (optional). Robust structure suitable for professional use. Maximum application ...

Cutting width: 90 cm - 240 cm
Tractor power: 30 ch - 85 ch

... cutting height. The models 140 - 160 - 180 - 200 - 225 - 240 are standard equipped with mechanical side-shift (in option hydraulic side shift), with hammers/knives, and with rear roller to adjust the cutting height.

Cutting width: 65 cm - 145 cm
Tractor power: 37 kW - 142 kW

... brushcutting-mulching industrial system to be installed on most excavators or other carriers with articulated masts. DAH brushcutter-mulchers are designed for vegetation control work.

Cutting width: 80 cm
Weight: 130 kg

... idrauliche (Mod.TS). A SINGLE ACTING or OPEN CENTRE hydraulic power system La portata e la pressione al motore idraulico, indicata nella tabella, deve essere costante. The Fow rate and pressure to the hydraulic ...

Cutting width: 303 in
Rotational speed: 1,000 rpm
Tractor power: 150 ch - 300 ch

• High capacity gearbox with large oil volume reduces heat buildup, extending bearing and gear life • Specially designed oil seal protectors prevent vines from encasing and damaging gearbox oil seals • 12.75-inch diameter flail tubes ...

Cutting width: 1,600 mm - 2,850 mm
Tractor power: 51 kW - 88 kW

... reinforced) • Hydraulic cylinders for tilt of the wires rotors • Transmission to the wires rotors by hydraulic motor • Electro-hydraulic automatic feeler with electrovalves, flow regulator, ...

Cutting width: 1.6 m
Rotational speed: 540 rpm
Tractor power: 75 ch

... 168 mm in diameter, with scraper TECHNICALS SPECIFICATIONS -Axial and lateral rear mounted assembly -Independent hydraulic circuit with cooling system -Piston pump and motor -Power: 55 hp -Cutting height adjustable ...

Cutting width: 42 in
Tractor power: 75 ch - 135 ch

... excavtor mulchers have a synchronous belt drive system eliminates belt and drive sprocket slippage and a heavy duty bent axis variable displacement piston motor that offers better performance optimization. ...

Cutting width: 0.9 m - 1.8 m
Rotational speed: 540 rpm
Tractor power: 26 ch - 60 ch

Reinforced model for tractor from 26-60 Hp The HYDRAULIC MOVABLE SHREDDER BTM is particularly suitable for mincing vine- sarments and fruit-tree pruning (even big size), for cleaning the underwood and cutting the grass. Standard ...

Cutting width: 1.25 m - 1.8 m
Tractor power: 29 kW - 66 kW
Weight: 335 kg - 582 kg

... wood in vineyards and orchards. The T2 shredder/mulching machines is available with a fixed three point hitch or with a hydraulic offset mechanism operated from the driving position The T2 can be used in combination ...

Cutting width: 1.3 m - 2 m
Tractor power: 40 ch - 80 ch

... shredder for agriculture and maintaining of green areas. It is suitable for roadsides, embankments, parks and gardens. Hydraulic inclination 90° - 70° Side parallelogram displacement Self-levelling floating system Work ...

Cutting width: 1,380, 1,580, 1,780, 1,900, 2,100 mm
Tractor power: 40 ch - 130 ch
Weight: 490, 540, 590, 670, 710 kg

Brief Introduction: Idea for cleaning green areas, gardens, slopes, ditches, bank of watercourses, road side banks.

Tractor power: 80 ch - 125 ch

... hammer Double gear box with built-in free wheel Accident – prevention protection Protected cardan shaft Rear wheels Hydraulic pick-up