Hydraulic mulchers

Cutting width: 1,250 mm - 2,389 mm
Rotational speed: 540 rpm
Tractor power: 50 ch - 120 ch

It is mainly used for shredding pruning waste in olive and fruit orchards. Shredder with hydraulic gate opening. More comfortable and easier to handle from the tractor. Works forwards and backwards hitched to the rear ...

Cutting width: 1,600, 2,000, 2,200, 2,400, 1,500 mm
Rotational speed: 540 rpm
Tractor power: 50 ch - 120 ch

Large volume shredder. Thanks to the group and the 5 belts, the shredder transmits great power to the hammers with tractors of more than 50 hp. Displacement 500 mm. ADVANTAGES 5 top quality belts. Hammers on 168 mm shaft Height ...

Cutting width: 1,300, 1,500, 1,600, 1,800 mm
Rotational speed: 540 rpm
Tractor power: 80 ch - 150 ch

Cutting width: 800, 1,000, 1,200, 1,400, 600 mm
Weight: 158 kg - 600 kg

-For excavator from 2 to 13 ton. -HBC system (Hydraulic Block Control) allows oil flow regulation, pressure limitation and progressive braking of rotor. -Rotor electronically balanced to real rotation speed. -Helicoidal ...

Cutting width: 1,400, 1,000 mm
Weight: 1,086, 640, 505 kg

... shape for an optimal shredding -Rotor electronically balanced to real rotation speed for more durability -HBC system (Hydraulic Block Control) allowing oil flow regulation, pressure limitation and progressive rotor ...

Cutting width: 2,000, 1,800, 2,200 mm
Tractor power: 80 ch - 125 ch
Weight: 1,260, 1,180, 1,100 kg

... -Adaptable on front or rear 3-point linkage thanks to the multiplier casing with dual output and double free wheel. -Hydraulic rear trap with cylinder to release the waste. -Double row of front chains and anti-spatter ...

Cutting width: 1,000, 1,200, 1,400, 1,650 mm
Rotational speed: 3,150 rpm
Tractor power: 16 ch - 45 ch

100cm working widht, 140kg - DELEKS® LINCE-100 - for 16-40Hp tractors, Pto shaft CE included, 330g heat forged hammers to shred vegetation up to 2,0-3,0 cm thick, OVERVIEW The LINCE-100 flail mower has been designed for low-powered ...

Cutting width: 1,000, 1,200, 1,400, 1,650 mm
Rotational speed: 3,150 rpm
Tractor power: 14 ch - 45 ch

... bearings. Gearbox P.T.O. 540 r.p.m. Lombarda Ingranaggi Srl with free-wheel (3 Years warranty). 25cm manual side shift (hydraulic as option). The body is equipped with an internal curb which diverts the air flow ...

Cutting width: 1,200 mm
Rotational speed: 2,300 rpm
Tractor power: 30 ch - 60 ch

Shredder with hammers 120cm / 285kg for tractors - DELEKS® LINCIONE-120 - Pto shaft included. OVERVIEW Shredder with hammers for orchard, vineyard, olive grove and uncultivated areas. Professional Flail Mower with 3 point linkage ...

Cutting width: 280, 320 cm
Tractor power: 80, 70 ch
Weight: 1,105, 903 kg

Flail shredder; also known as Flail Mower or Chopper; is used to shred plant wastes after harvest. All the plant wastes and residues got broken in very little pieces. With the process, residues can dissolve in the soil easily. The process ...

Cutting width: 200 cm
Rotational speed: 540 rpm
Tractor power: 55 ch

Agromeks Panther Branch Collection and Shredding Machine offers a crucial solution in orchard maintenance. With this innovative device, the effective gathering and processing of diseased and unnecessary branches in orchards become possible. ...

Cutting width: 130, 150, 100, 115 cm
Rotational speed: 540, 1,000 rpm
Tractor power: 12 ch - 40 ch

Mulcher light duty with optional hydraulic side shift • Adjustable 3-point linkage • Helical cutting system • It cuts prunings of max. ø 3cm The TFL-S mulcher is designed ...

Cutting width: 160, 180, 200, 220, 240 cm
Rotational speed: 540, 1,000 rpm
Tractor power: 40 ch - 90 ch

Parallelogram mulcher with hydraulic shift • Rounded right side with no hitch links • Helical cutting system • It cuts prunings of max. ø 5-6cm • Maxi lateral displacement for work under the canopy The ...

Cutting width: 155, 185, 205, 230, 260 cm
Rotational speed: 540, 1,000 rpm
Tractor power: 50 ch - 150 ch

Extra heavy duty mulcher • Linear cutting system • 30cm inlet opening • Double front protection (flaps and chains) • Body with increased shredding volume • Gear box height: 80cm The TMS-PRO mulcher ...

Cutting width: 90 cm - 120 cm
Tractor power: 70 ch - 120 ch

... Oblique hydraulic inclination of shredding body – Hydraulic inclination to adjust cutting height – Lateral displacement 70 cm frame size 150 cm (for 3-POINT BM22) – Antifoam 50 lt oil tank – Oil cooling ...

Cutting width: 2,800, 3,000, 3,200 mm
Rotational speed: 750, 540, 1,000 rpm
Tractor power: 120 ch - 180 ch

Shredder suitable for open fields with reinforced structure and transmission, rotor with 2 knife spirals + 2 hammer spirals with larger internal chamber to facilitate the outflow of the chopped mass. Standard equipment – CE safety ...

Cutting width: 1,300 mm - 2,800 mm
Weight: 460 kg - 1,390 kg

Shredder with cage for collecting the processed product suitable for grass and twigs. Standard equipment – CE safety guard – Rear hitch – Adjustable Rear Roller – Roller scraper – Multiplier with freewheel – Hammers – Right ...

Cutting width: 1,000, 600, 800 mm
Weight: 100, 115, 85 kg

It is characterized by a symmetrical design, allowing the use on both sides, speeding ud the cutting phase. The compacts design allows to reach inaccessible places. Features • Shell with double symmetrical mouth that allows cutting ...

Cutting width: 900, 500, 700 mm
Weight: 90, 105, 120 kg

This Mulcher fit excavators from 0.8 ti 4.0 tons. Ideal for carrying out reclamation work even in confined spaces, making the SE series products suitable for amateur and professional work. Cutting size (Max) diameter ...

Cutting width: 900, 1,100, 1,300 mm
Weight: 215, 240, 265 kg

This Mulcher fit excavators from 4.0 to 8.0 tons. Ideal for carrying out reclamation work on grass and shrubs, the SM range with his compact and robust design, is versatile for different fields of activity such a construction, ...

Cutting width: 110, 130, 150, 170, 190 cm
Tractor power: 40, 25, 30, 35 ch
Weight: 345, 257, 281, 303, 320 kg

Flail topper series UML is intended for usage on all agricultural areas, maintenance of green spaces and neglected fields. Mulches harvest residue and branches up to 4 cm in thickness. Quality and robust construction enables intensive ...

Cutting width: 120 cm - 220 cm
Tractor power: 25 ch - 60 ch
Weight: 325 kg - 489 kg

... opening cover (door) • to ease work in difficult work conditions ADDITIONAL EQUIPMENT • Y blades • front hydraulic mounting • hydraulic offset

Cutting width: 150, 170, 190, 210, 230 cm
Tractor power: 50 ch - 120 ch
Weight: 606, 627, 556, 568, 585 kg

... EQUIPMENT • driveshaft • flails • gliders – height adjustable skis • rear roller – height adjustable • hydraulic lateral offset • hydraulic vertical offset (from -45° to +90°) ADDITIONAL EQUIPMENT • ...

Cutting width: 1.65, 1.95 m
Rotational speed: 540 rpm
Tractor power: 40, 70 ch

Identical in design to the vegetable strippers, it differs in that its rear roller takes the height reference from the plastic film. It allows the film to be cleaned after harvesting in order to facilitate its recovery. OPTIONS Trimmer ...

Cutting width: 2,260 mm
Rotational speed: 540 rpm
Tractor power: 75 kW

... difficult maintenance work, which can occasionally arise. Thanks to the external multiplier group on the “PRO” version, the mulcher can go completely outside of the tractor’s tread, making it particularly suitable for ...

Cutting width: 1,400, 1,200, 1,600 mm
Rotational speed: 540 rpm
Tractor power: 40, 50, 60 ch

... and of small little wood, for high efficiency demands of productivity, quality of work and trustworthiness. Thanks to the hydraulic shifts is possible to work even out of the tractor shape and on dikes, banks and ditches. Positioning ...

Cutting width: 3,230, 5,230, 4,630, 6,430, 5,730 mm
Rotational speed: 1,000 rpm
Tractor power: 80 ch - 170 ch

The CASTORE mulcher has been designed to meet the demands of medium-large farming companies. Thanks to the large cutting chamber, sturdy rotor with spiral tool layout and notched counterblade able to break down even the ...

Cutting width: 2,325, 2,075, 1,825, 2,825, 2,575 mm
Rotational speed: 1,000 rpm
Tractor power: 100 ch - 170 ch

... Bearing Protection by Valentini” •Rear containment sheets and selection grids for crushed product that can be adjusted with a Hydraulic jack •Protective shroud casing and sledge on outer side •Protective counter bonnet ...

Cutting width: 1,075, 1,325, 1,575 mm
Rotational speed: 540 rpm
Tractor power: 130, 150, 100, 110 ch

The a must-have for every farmer and contractor thanks to its multipurpose features: in agriculture it transforms forest land into arable land; a land initially not workable with the presence of trees and brushwood, can subsequently be ...

Cutting width: 130 cm
Tractor power: 25 ch - 50 ch
Weight: 220 kg

Reinforced front flail mower for front mower ISEKI . for intense crush, comminution, gras or scarification. •Assembly for Front ISEKI SF235. •Delivered with specific adaptation kit Working width : 130 cm. •2 point front linkage •Curved ...

Cutting width: 155 cm
Tractor power: 25 ch - 50 ch
Weight: 235 kg

•Assembly for Front ISEKI SF235. •Delivered with specific adaptation kit •2 point front linkage •Curved chassis sheet metal 3 mm •pneumatic front tyres filled with tyre sealant Ø23 x 8,5 cm. •Rotation speed of rotor : 2350 tr/mn. •System ...

Cutting width: 130 cm
Tractor power: 25 ch - 50 ch
Weight: 220 kg

Reinforced front flail mower for front mower ISEKI . for intense crush, comminution, gras or scarification. •Assembly for Front ISEKI SF310 - SF370. •Delivered with specific adaptation kit •2 point front linkage •Curved chassis ...

Cutting width: 1.6 m
Rotational speed: 750 rpm
Tractor power: 50 kW - 90 kW

The ELHO mulcher range has expanded with the addition of the impressive new Tornado 560! The brand-new ELHO Tornado 560 is a mechanically driven chain mulcher with an impressing working reach of 5.5 ...

Cutting width: 1.6 m
Weight: 350 kg

Hydraulic chain cutting head for boom machines! The Tornado L is a cutting head with two chains that is suitable for boom machines. The cutting head is designed for use with excavators, forest loaders and other machines ...

Cutting width: 2.1 m
Rotational speed: 540 rpm
Tractor power: 50 kW - 80 kW

An effective mulcher for professional bush, shrub and brushwood clearances, roadside mowing, managing fallow land and pastures, and forest roadside mowing! The ELHO SideChopper 420 PRO is a mulcher that ...

Cutting width: 105, 125, 65, 85 cm
Weight: 214, 240, 135, 175 kg

Studied to be attached on excavators from 1.8 to 9 tons. The machine has a bidirectional engine and employs the excavator’s oil circuits. It is ideal for weeding out infesting plants and shredding bushes up to 5-6 cm of diametre diametre ...

Cutting width: 130, 160 cm
Weight: 920, 1,020 kg

It is designed for attachment and use on excavator machines from 120 quintals up to 250 quintals. It uses a piston motor and the hydraulic circuits of the excavator. It is used for the removal plants ...

Cutting width: 45 cm
Weight: 69 kg

It can be used with excavators from 1,3 to 2,5 tons.due to its compactness and lightness. It uses a bidirectional motor which can be supplied with drainage or without drainage. It is particularly suitable for mowing grass and small ...

Cutting width: 540 mm - 1,240 mm
Weight: 180 kg - 270 kg

The TLBE mulching head is ideal for the shredding of grass, reeds and bushes up to a maximum of 5 cm in diameter, near ditches, embankments and on all steep slopes. Fits mini excavators weighing from 1.8t to 5t. STANDARD ...

Cutting width: 1,640, 1,540, 1,440, 1,340, 1,240 mm
Weight: 300, 280, 340, 320, 310 kg

The TLB-F hydraulic mulcher for skid steers is a robust and versatile tool suitable for the shredding of grass, reeds and bushes up to a maximum of 5/6 cm in diameter. It adapts to skid steers with a ...

Cutting width: 1,540, 1,440, 1,340, 1,240, 1,640 mm
Tractor power: 20 ch - 30 ch
Weight: 350, 340, 320, 310, 300 kg

... shredding of grass and small shoots. It has a three point hitch and can be applied to crawler and wheeled tractors. The hydraulic displacement (max 30 cm) allows the use in a decentralised position for the processing ...

Cutting width: 125 cm - 325 cm

... universal machines. They can moreover be equipped with one or two swing disks (with cutting blades or rakes) and with a hydraulic transmission system which is ideal for particularly demanding and time consuming jobs.

Cutting width: 1.4, 1.8, 2.3 m
Tractor power: 40 ch - 2,000 ch

... micro-tractors. The MJ-STH shredder is a derivation of the MJ with a hydraulic drive and a fast coupling depending on the carrier engine, ideally for the skidder or loader. The low pressure hydraulic ...