Impeller pumps

Flow: 0 us gal/min - 190 us gal/min
Pressure: 0 psi - 45 psi

... CAUTION-WARNING: Please do not run pumps dry, restrict or reduce port sizes or dead head pumps. This could cause component failure to pump. No Flammables. - DO NOT USE WITH FLAMMABLE ...

Flow: 30.3 l/min - 54.1 l/min
Pressure: 0 psi - 160 psi

... Modified impeller design develops higher pressure at lower RPM. Durable E-Coat finish provides extra corrosion resistance on all surfaces inside and out. Oversized bearings for extended pump ...

Flow: 21, 42, 72, 120, 180 m³/h

Single-stage close coupled electric pumps with axial inlet, scroll outlet and with impeller splined to the shaft.

Flow: 5,100, 4,800, 5,700 l/min
Pressure: 1.3, 2, 1.8 bar
Power: 7.5, 11, 15 kW

Submersible pumps AT/ATF/GTF Eisele submersible pumps AT have been produced by us since 1972 and are used in the agricultural and industrial sectors. Key data: •Simple installation •Highly efficient •For ...

Flow: 160 l/s
Power: 15 kW

... electric submersible pumps for raising waste water. Expressly designed for pumping residential and industrial waste, in drainage lifting stations and water treatment plants. Single-and double-channel hydraulics or with ...

... loading Adjustable flow rate without damaging the pump Abrasion-resisting steel used in high wear areas. All stainless steel hardware used below liquid line for long life. Shear plate located close to the impeller ...

Flow: 450 m³/h
Power: 45 kW

One of SAER's longest-running product series, completely redesigned to offer the highest performance in terms of output and efficiency. Ideal for recirculation and air conditioning systems, water supply and pressurisation groups. Various ...

Power: 5.5, 7.5, 4 kW

G6-220 PUMP FOR GRAPES (patented) it is ideal for whole and destemmed grapes, , with very wide passages (300x200), low rpm (45-57). It guarantees maximum respect of the grapes. It acts by pressure and not by centrifugal ...

Flow: 200 m³/h - 350 m³/h
Pressure: 2, 3.2, 3.8 bar
Power: 11, 17, 22 kW

Reliable slurry pump in slurry pits and liquid manure tanks An additional system for slurry pits allows the pump to mix and pump the slurry in the pit. The submersible motor high-pressure ...

Flow: 340 m³/h

... cutting device. They are also going under the name ‘chopper pump’. Both types are rotary pumps, featuring a multi-channel impeller which allows to achieve pressures of up to 5 bar. The ...

Flow: 90 m³/h - 200 m³/h
Pressure: 0.84 bar - 2 bar
Power: 3 kW - 18.5 kW

Submersible manure pumps have the toughest job around the farm. Knowing this, we build our submersible pumps at EYS to withstand the most difficult conditions so that you can always count on your EYS ...

Flow: 22 m³/h
Power: 0.2 kW - 7.5 kW

... electric pump are made of precision cast stainless steel, which ensures corrosion resistance, durability and firm coupling with the motor.BH series 4 inch submersible electric water pump uses hexagonal ...

Flow: 5 l/min - 375 l/min

ELECTRIC SUBMERSIBLE PUMPS CASED VERSION 4” (SERIES 95 PR N/) >The submersible pumps series 95 PR N/ are the smallest in the wide range of submersible pumps produced by PANELLI and sumarize ...

... fully automatically by the umbilical pump, there is restricted return to the slurry tank which means that there is no risk of "hydraulic shock" on the pump impeller or gearbox which can ...

Flow: 20, 30, 80, 120 l/min
Power: 0.6 kW - 1.1 kW

SIR IRRIGATION STATIONS SUBMERSIBLE PUMPS SUBMERSIBLE PUMP FOR 5” WELLS Material Outer shell, motor cover, seal holder disk, filter and fastening ring in AISI 304; impeller, difuser ...