Irrigation pumps

Power: 55 kW - 175 kW

Low-cost irrigation starts already with the design of the entire system. An essential part of this is that the pumping unit matches perfectly with the irrigation machine. Obtaining both from one supplier ...

Flow: 17, 25, 35, 50 m³/h
Pressure: 4, 7, 9, 10 bar

Rotary lobe pumps in the VX100 series are used wherever you only need small capacities but you want the advantages of rotary lobe pumps from the VX series. With capacities of up to 50 m³/h and pressures ...

Flow: 1,300, 1,200 l/min
Pressure: 210 bar

Rugged, self priming centrifugal pumps with hydraulic motor for filling or transfer of large tank volumes Technical -3" inlet/outlet threads Technical data hydraulic motor: -max. 49 l/min oil flow

Flow: 25 l/min - 72 l/min
Power: 8 ch - 13 ch

two tyre galvanized frame with manual handle to move the motor pump, standard engine drive and hand starting, suction and delivery flanges on the pump.

Flow: 76.4 l/min
Pressure: 30 bar
Power: 5.4 ch

... though the pump, increasing volumetric efficiency. Robust pump mounting feet fixed to pump body. External nuts and bolts in 304 grade steel. Pump shaft 1 3/8” six spline ...

Flow: 0.2 m³/h - 7 m³/h
Power: 1,500, 300, 600, 900 W

... pack is composed of 3 main elements: a 3” WPS® stainless steel centrifugal pump, a 3” WPS® PMM motor and a WPS® Solar PMM controller. The 3” WPS® pump: .centrifugal pump entirely ...

Flow: 535, 725, 215, 245, 365 l/s

Flow: 60 m³/h - 130 m³/h
Power: 21 kW

ENGINE: LOMBARDINI DIESEL 9 LD 625.2 Weight: 161 kg. Starter: electric start Dimensions: 1050 x 595 x 565 mm. Water pumps for clean water transfer.

... are specialists in: Pumps for trickle/drip irrigation systems For supplying the right amount of water to each plant, only when and where it is needed, metering it down to the milliliter to avoid wasting ...

Pressure: 150 bar - 270 bar

VINCKE CLOCKWISE THREATED GEAR PUMPS GROUP 1, EUROPEAN FLANGE, CON. SHAFT 1:8

... efficient, can be used and installed in water supply systems, washing, fire protection, conditioning and cooling systems, irrigation and pressure boosting. They are designed for several uses and are characterized by sturdiness, ...

Pressure: 150 bar - 290 bar

The „PS-1 /2 /3“ gear pumps include the following groups, displacements and max. pressures: GR.1: from 0,9 to 9,8 cm³/rev – Max.pressure 290 bar, GR.2: from 4 to 26 cm³/rev – Max. pressure 290 bar, GR.3: from 19 to 62 ...

Flow: 100 l/min - 5,500 l/min
Pressure: 10 bar
Power: 1.5 kW - 37 kW

Monobloc horizontal centrifugal pumps, constructed in compliance with EN 733 standards; widely used in water supplies, pressurisation and fire-fighting systems, cooling, heating, irrigation, industrial ...

Flow: 3,500, 6,500 l/min
Power: 24, 60 kW

The ELBA pump series is made up by combining a gearbox and a centrifugal pump. The ELBA group is utilized for farm lands irrigation, sewage spreading and umbilical systems. STANDARD ...

Flow: 210 l/min
Power: 2.9 kW

Our ZEN gasoline water pumps, with their lowest weight in the range, are useful for transferring, low pressure irrigation and clear water spraying. They are also equipped with “OIL ALERT” device. Diam. ...

Flow: 0 m³/h - 38 m³/h
Power: 5.5 ch - 35 ch

... of various types of liquid material, •Autoclave and water tank entrances, •Fountains, •Irrigation systems, •Lawn and garden irrigation, •Sprinkler and drip systems, •Greenhouses ...

Flow: 79 l/min
Pressure: 50 bar
Power: 7.3 ch

Number of Membrane 3 Power Hp 7.3Cycle RPM 540 Weight kg 17,5

Flow: 450 m³/h
Pressure: 16 bar

Blockpump Single Stage Pumps – LSB Single stage end suction pump in close coupled (block) design, based on the hydraulics acc. to ISO 2858, with direct mounted IEC motor, design B5.

Flow: 65, 80, 130, 28, 50 m³/h
Pressure: 10, 8, 6 bar

Self-priming Lobe Rotor Pumps for Impure and Viscous Liquids The AGM rotary lobe pump is a Danish designed and manufactured pump which gives you numerous advantages - also when pumping ...