LED control panel

Operating temperature: -30 °C - 85 °C

... cluster, works with J1939 and Analog inputs. Sunlight readable display shows additional parameters and system messages. 18 LED warning lights are triggered by either J1939 messages or analog/digital signals. Features: • ...

Operating temperature: -30 °C - 85 °C

... or 24 volt nominal systems, 9-32 VDC Connectors - 2 x 6-pin Deutsch DT Series Connectors Warning Lights - 2 dead-fronted LED status indicators (amber & red) Input - 4 configurable inputs for resistive or voltage output ...

Operating temperature: -20 °C - 70 °C

... 280b: 1 Deutsch DT06-08SA connector maxAI 280b: Add'l 1 Deutsch DT06-6S connector Warning Lights - Amber/RED dead-fronted LED indicator Input - maxAI 280: 2 config. Inputs,

Operating temperature: -20 °C - 70 °C

maximatecc's most advanced engine monitoring system allows you to fully customize your display to suit your application. The maxAI 430 is available in four models to fully integrate with your vehicle. The vibrant 4.30" TFT display provides ...

Operating temperature: -40 °C - 85 °C

... electronics architecture enables a standalone solution. FEATURES: - 9-32V operating voltage - English or Metric units - White LED backlighting - Reliable and accurate stepper motors - Reinforced case w/ integral ...

Length: 87.5 mm
Width: 87.5 mm
Height: 37.7 mm

With the EngineMonitor display devices, we offer expansion tools especially for the use in industrial engines with CAN J1939 interface. They enable the user to retrieve information from the engine and communicate commands directly. Thanks ...

Length: 112.5 mm
Width: 115 mm
Height: 49 mm

With the EngineMonitor display devices, we offer expansion tools especially for the use in industrial engines with CAN J1939 interface. They enable the user to retrieve information from the engine and communicate commands directly. Thanks ...

Operating temperature: -40 °C - 85 °C

For mobile applications, such as the visualization, operation and control of special functions in your truck, mobile work machines/construction machines and other special vehicles, it is necessary to develop and provide ...

Customizable dial plate, front bezel and internal mask Dimensions: Ø 100 mm, external frame Ø 107 mm 3.1” dot matrix LCD 160 x 56 pixel Power supply: 12 Vdc Protection degree: IP66 front, IP65 rear CAN bus interface RTC (optional), ...

Length: 230 mm
Width: 120 mm
Height: 59.9 mm

Customizable dial plate, front bezel and internal mask 2.2” segment LCD 2 analog gauges 1 LED bar graph Power supply: 12 Vdc (9-16 Vdc) or 24 Vdc (18-32 Vdc) Protection degree: IP66 front, IP65 rear RTC (optional), ...

Length: 230 mm
Width: 120 mm
Height: 59.9 mm

Customizable dial plate, front bezel and internal mask 2.2” segment LCD 2 analog gauges 1 LED bar graph Power supply: 12 Vdc (9-16 Vdc) or 24 Vdc (18-32 Vdc) Protection degree: IP66 front, IP65 rear RTC (optional), ...

CAN | CANopen | SAE J1939 Emmission Control Tier 4 Excellent visualisation: 3.5” display, 320x240 pixels, 4 buttons, 4 LED warning lamps, digital and analogue inputs as well as a CAN-bus interface with ...

The instrument cluster with 3 displays, one square 3.5” TFT colour display at the centre and two round TN displays, provides you everything to keep the vehicle data under control. On ...

This instrument communicates by CANopen or SAE J1939 and supplies the following information for example: •Fuel level •Engine revolutions per minute (rpm) •Speed •Oil pressure •Coolant temperature •Diagnostic messages •etc. Indication ...

An attractive designed instrument cluster consisting of one Dot-Matrix display and two TN displays with bar graph display. The two buttons are backlit and used to set the hours as well as to scroll ...

d electronic control units (ECUs). Extensive range of casing sizes and custom front fascias guarantee a unique design of standard units tailored to your requirements. Designed and produced to withstand tough ...

Circular instrument with one Dot-Matrix display, 160 x 128 dots, 2 buttons and 15 LEDs. Indicates excellently the vehicle functions and like all other BAUSER instruments the clusters are constructed to withstand rough ...

... display there is a 6 digit 7-segment indication for operating hours, service values or the time. To add to the maximum 10 colour LEDs, which alerts you of disturbances and limit values.

Limited space in your cockpit? The casing of the all round solution has just a cutout of 52 mm, but supplies maximum 3 LEDs and a backlit LCD. The 6 digit indication visualises for instance: Operating hours, service ...

Compact 12 button sealed CAN enabled keypad makes the CL-607 ideal for consolidating large mechanical switches and reducing wiring harness complexity. Rugged and sealed to IP67 level, the CL-607 is also able to be mounted external to ...

Compact 12 button sealed CAN enabled keypad makes the CL-608 ideal for consolidating large mechanical switches and reducing wiring harness complexity. Rugged and sealed to IP67 level, the CL-608 is also able to be mounted external to ...

Compact 8 button sealed CAN enabled keypad makes the CL-608 ideal for consolidating large mechanical switches and reducing wiring harness complexity. Rugged and sealed to IP67 level, the CL-608 is also able to be mounted external to ...

Compact 16 button sealed CAN enabled keypad makes the CL-613 ideal for consolidating large mechanical switches and reducing wiring harness complexity. Rugged and sealed to IP67 level, the CL-613 is also able to be mounted external to ...

Compact 8 button sealed CAN enabled keypad makes the CL-614 ideal for consolidating large mechanical switches and reducing wiring harness complexity. Rugged and sealed to IP67 level, the CL-614 is also able to be mounted external to ...