Livestock farming pumps

Flow: 10 l/h - 2,500 l/h
Pressure: 0.3 bar - 6 bar

... Certified suitable for Food Contact - Safe for human and animal health .Compatible with a wide range of veterinary treatments, livestock additives & biocide products commonly used in Animal Health .Compatible with the ...

Flow: 4.5 l/h - 2,500 l/h
Pressure: 0.15 bar - 4 bar

This Diaphragm Metering Pump meets the dosing needs from 4.5 to 2500 l/h. .Best performances at low flow (young animals / small groups) .Best performances at low pressure (headertanks, pressure drops) .Unequalled ...

Flow: 10 l/h - 2,500 l/h
Pressure: 0.3 bar - 6 bar

... of the dosing pump. - The SmartDosing+ to computer cable (USB port). - The SmartLink+ software, allowing you to track and analyse your treatment data, to feed your breeding book and ensure the proper operation ...

Flow: 500 l/h - 9,000 l/h
Pressure: 0.3 bar - 8 bar

Special for large-scale production The D9AL range meets treatment requirements from 500 l/h to 9 m3, for applications such as pig fattening, large breeding buildings or supplementation in large-scale cattle production. .Extended ...

Flow: 1 m³/h - 20 m³/h
Pressure: 0.12 bar - 10 bar

Drinking water treatment for large livestock farms The D20AL range meets treatment needs from 1 to 20 m3/h, and is particularly adapted to the flow rates of large cattle farms. Proportional dosing and without electricity Specifications .Injection ...

Flow: 10 l/h - 2,500 l/h
Pressure: 0.3 bar - 6 bar

The special dispenser for organic acids The Expert D25 AO range allows, thanks to a selection of materials with high chemical resistance, the dosage of concentrated organic acids without pre-dilution. .Proportional dosing and without ...

Flow: 10 l/h - 2,500 l/h
Pressure: 0.3 bar - 6 bar

The special dispenser for organic acids The Expert D25 AO range allows, thanks to a selection of materials with high chemical resistance, the dosage of concentrated organic acids without pre-dilution. .Proportional dosing and without ...

Flow: 10 l/h - 3,000 l/h
Pressure: 0.5 bar - 6 bar

... meets the dosing needs for flow rates from 10 to 3,000 l/h. It is characterized by: .An optimized design .A polypropylene pump casing .Highly ergonomic dosage adjustment .The availability of micro and macro dosages .AF ...

Flow: 10 l/h - 2,500 l/h
Pressure: 0.3 bar - 6 bar

The Expert D25 IE PVDF range is particularly suitable for difficult dosing conditions, such as those related to corrosive or abrasive additives. .Proportional dosing and without electricity .Proportionality dependent on water flow .PVDF ...

Flow: 0.2 m³/h - 7 m³/h
Power: 1,500, 300, 600, 900 W

... pack is composed of 3 main elements: a 3” WPS® stainless steel centrifugal pump, a 3” WPS® PMM motor and a WPS® Solar PMM controller. The 3” WPS® pump: .centrifugal pump entirely ...

Flow: 0.5 m³/h - 180 m³/h
Power: 0.4 kW - 75 kW

... surface pumping system is composed of three main elements: a WPV surface pump, a WPV surface motor and a WPS® Solar controller. WPV surface pumps: .The WPV surface pumps are ...

Flow: 0.5 m³/h - 400 m³/h
Power: 0.4 kW - 75 kW

... any pumping of muddy water where the pump can be submerged. Our WPD Solar drainage pumping systems are composed of two main elements: a WPD drainage pump and a WPS® Solar controller. The WPV Solar ...

Flow: 1.5 m³/h - 8 m³/h
Power: 0.4 kW

the 4” WPS® Solar ECO pack is a solution for 4” borehole solar pumps using a WPS® 0,37kW 3x230V AC motor and a 4” WPS® stainless steel borehole pump A special WPS® Solar controller has been developped ...

Flow: 0.5 m³/h - 260 m³/h
Power: 0.3 kW - 185 kW

... WPS® borehole pump, a WPS® submersible motor and a WPS® Solar controller. WPS® borehole pumps: .Any of the WPS® borehole pumps can be used in a WPS® Solar pumping system, from ...