Mulchers

Cutting width: 1,000, 1,300, 1,200, 1,400 mm
Tractor power: 15 ch - 50 ch
Weight: 285, 265, 350, 300 kg

... STEEL Mulchers designed for low-power tractors, they finely shred grass, vine shoots and pruning waste up to a maximum diameter of 3 cm. They finely shred grass, vine shoots and pruning waste up to a maximum diameter ...

Cutting width: 2.8 m - 4.8 m
Tractor power: 90 ch - 150 ch

Cutting width: 130 cm - 225 cm

The ecomower is ideally suited for the maintaining of rough vegetation such as at road verges. The ecomower mows the vegetation by means of a rotating rotor with ‘loose’ hung flails attached to this. Through the rapidly rotating flails, ...

Cutting width: 1.8 m - 3 m
Tractor power: 55 ch - 100 ch

• Rotor Ø from 1,80 to 2,40 m: 180 mm • Rotor Ø from 2,60 to 3,00 m: 220 mm • Number of RPM: 1850 • Three point linkage cat. 2 • Centralised greaser • Automatic belt tightener • no. 2 counter-knife • Gearbox with ...

Cutting width: 1.1 m - 1.8 m
Tractor power: 44 kW - 60 kW

... 44-60kw • Cut up to 75mm pruning • Deck material thickness 5mm • Adjustable cutting height from 20-150mm The Rovic Mulcher is available in 4 sizes with cutting widths ranging from 1,1m to 1.8m to suit varying conditions. ...

Cutting width: 1.4, 1.6, 2 m
Rotational speed: 1,000 rpm
Tractor power: 150, 60 ch

... hydraulic opening hood and an adjustable push frame which work together to ensure that material is channeled efficiently into the mulcher. The Destroyer Flail is available in a choice of working widths between 1.4 ...

Are you looking for a machine that can • Give precision grass cutting with a perfect finish • Mow ditches, verges and embankments • Trim hedges and bushes Then this is the mower for you! The machine gives you precision ...

... fallen material and mulches to leave a fine finish. Features for Reliability and Ease of Use - Teagle Flail Mowers and Mulchers have a range of features to ensure ease of operation and straightforward maintenance ...

1.light flail mower with double blades is driven by a PTO shaft that transfers power from your tractor,suitable for 20-35hp. 2.Transmission: By sturdy toothed belts. 3.Gearbox is made of graphite casting iron. Material performance ...

Cutting width: 70 cm
Rotational speed: 3,300 rpm
Weight: 196 kg

High work rate and perfect handling. Equipped with a Briggs & Stratton Series 3 engine with an oil and fuel pump, 344 ccm displacement and up to 13 hp, the AS 701 SM performs in high grass, dense growth and on slopes without the risk ...

Cutting width: 200, 180, 160 cm
Tractor power: 100, 90, 80, 70, 60 ch

The TLI SENIOR SE is the right machine for the large farm or contractor that needs a robust machine and able to reach every point of the ground. This version has hardened pins and bushings that provide maximum durability

Cutting width: 1,300, 1,500, 1,800, 2,000, 2,250 mm
Rotational speed: 1,000 rpm
Tractor power: 40 ch - 130 ch

Forest mulcher T.F.V.J. swinging hammers for tractors from 40 to 130hp. Suited to mulch brushes and trunks up 200mm diameter. Suitable for all kinds of wood, gardening and agricultural uses. Compact and robust frame ...

Cutting width: 1.4, 1.6, 1.8, 2, 2.2 m
Tractor power: 50 ch - 150 ch

The KB-160 allows you to mow behind the tractor or to the side of the tractor (on slopes). In the second case, there is no need to drive your tractor on the slope during mowing (mainly because of mower’s capability to move the maximum ...

Tractor power: 90 ch - 220 ch

TECHNICAL FEATURES · Chassis with double height and internal reinforcements. · Protection with front and rear chains. · Protection with a oscillating rear hood. · Height adjustable and rounded skids (3 positions) with the Widest System. · ...

Cutting width: 45, 56 in

Quadco Forestry Mower Mulchers 56″ Timed-Belt Drive Mower Quadco 56″ mower mulches vegetation into fine material, discharging directly to the ground. The drum mower is designed to fit a wide range of applications–from ...

... Extra strong and designed with safety in mind; -Support legs for storage; -Solid hitch. The Verge Flail Mowers are mulcher with hydraulic arm for clearing larger, wider areas, roadsides verges, orchards and green areas.

Cutting width: 170 cm

... Predator 1700 M. we have focused on materials, to increase the cutting width and to optimize the weigth of the machine. The mulcher has a 1.7m wide head, which lost weigth 85kg compared to the previous model. The roughest ...

Cutting width: 125, 145, 165 cm
Tractor power: 30 ch - 45 ch

Cutting width: 1,650, 1,840, 2,020, 2,210 mm
Tractor power: 45 ch - 80 ch

SHAKTIMAN Rotary Mulcher is robust and reliable implement for mulching of vineyards, orchard pruned materials, grass, bushes, crop residues like sugarcane trash, wheat & paddy straw, maize stalk etc. Mulcher ...

Trident 4000 and 5000 Park is constructed to maintain large green areas. The quality of the work is on level with a Reel mower and through the very robust construction the Trident Park can also be used on areas that is only cut 1-2 times ...

Cutting width: 500, 600, 700, 800, 1,000 mm
Tractor power: 8 ch - 18 ch

MTP flail mowers fit walk-behind tractors from 8 to 18 Hp (from 6 to 14 kW). These tools have been designed to cut grass and small branches in vineyards, orchards and plant nurseries. They are extremely reliable, efficient, high performing ...

The operation - The vine shoots are removed by a pick with theeths and are conveyed into a shredding device equiped with hammers and counter-hammers - Once they are shredded, the vine shoots are ejected through a refining grill. - ...

Cutting width: 90 cm - 180 cm
Tractor power: 15 ch - 40 ch

Rear flail mower, compact and light, suitable for small tractors (from 15 HP). This machine is suitable for shredding grass and fibrous stalks (up to diameter 2 cm). Available with working widths 090 – 100 – 120 – 135 – 160 –180 cm. ...

Rotational speed: 2,300 rpm
Tractor power: 175 ch
Weight: 7,300, 9,300 kg

The 160C² is a compact 175 hp tracker. It can be fitted with a horizontal shaft mulcher or a gyro mulcher thanks to its Category 2 3-point attachment system. The 160C² is equipped with a hydrostatic ...

Cutting width: 65 cm - 145 cm
Tractor power: 37 kW - 142 kW

... brushcutting-mulching industrial system to be installed on most excavators or other carriers with articulated masts. DAH brushcutter-mulchers are designed for vegetation control work.