Plow moldboards

Weight:3.330 kg Hole spacing:100 Accessories 10301410 2x Plough bolt DIN 11014 M10x1,5x30 with hexagon nut 55.0000

Thickness: 7 mm

... deformations and rupture. Use: For a proper job, we recommend a working width of 280 mm. The recommended attack angle between the plough (once the tine is fastened) and the ground is about 3º.

... deformations and rupture. Use: For a proper job, we recommend a working width of 280 mm. The recommended attack angle between the plough (once the tine is fastened) and the ground is about 3º.

... deformations and rupture. Use: For a proper job, we recommend a working width of 280 mm. The recommended attack angle between the plough (once the tine is fastened) and the ground is about 3º.

... deformations and rupture. Use: For a proper job, we recommend a working width of 280 mm. The recommended attack angle between the plough (once the tine is fastened) and the ground is about 3º.

The chisel plough assembly works like the chisel plough, that is to say, very light tillage work. This type of plow is assembled with the chisel tines. Therefore, they are not like the conventional moldboard ...

The chisel plough assembly works like the chisel plough, that is to say, very light tillage work. This type of plow is assembled with the chisel tines. Therefore, they are not like the conventional moldboard ...

The moldboards of the moldboard plows are used to turn over the soil. They have a very important role in tillage work, they can turn over about 30-50 cm of soil. There are different shaped ...

The moldboards of the moldboard plows are used to turn over the soil. They have a very important role in tillage work, they can turn over about 30-50 cm of soil. There are different shaped ...