Pneumatic seed drills

Working width: 3 m

... lights and signs Main optional accessories - Versions Boot, simple disc and double disc: - Electronic indicator level seed - electronic hectare - Tram-line

Working width: 2, 3, 4.5, 6 m

... square 390 mm diameter with 100 mm tines The rear comb Single row of tines Double row of tines The seed drill Pneumatic Hopper capacity of 120 litres

CMN stubble-seeder is a combination of a stubble cultivator and a seed sower for sowing directly onto stubble or ploughed earth. At the same time the cultivator may be used for traditional stubble tillage. The CMN ...

Working width: 0 m - 20 m

... predecessor to the Amity Air Till Drill) proved over and over again this key to maximum production. Depending on your choice of seed openers, fertilizer can be placed with the seed ...

Working width: 6, 9, 12 m

... defined seed quantity within a range of 3.5 kg/ha to 300 kg/ha. PNEUMATIC HIGH-PERFORMANCE “MUSTANG” SEEDER FOR ALL TYPES OF CEREAL CROPS, RAPESEED, SOYA The pneumatic ...

Working width: 9.9, 10.7, 9 m

Steady Flow Planter-Spreader for Fine, coarse grains and forage. AIR DRILL G-600 Double disks (9.00 – 9.90 -10.70 meters) Folding frame, 1 central piece with 8 wheels 400/60×15,5” ...

Working width: 0 m - 3 m
Weight: 1,350 kg

... moisture is better retained around the seed. In addition, the seed is also brought better into contact with the moist soil. The Ringseeder is also equipped with folding side rollers. These side rollers ...

Working width: 3 m - 9 m
Inter-row spacing: 12.5 cm - 25 cm
Power required: 60 ch - 180 ch

... the Eco-Drill can sow from 5" (12.5cm) to 10" (25cm) for cereals and up to 20" (50cm) for OSR. The Eco-Drill's tine assembly offers superb contour following and accurate seed ...

Working width: 5 m
Inter-row spacing: 12.5 cm
Power required: 150 ch - 320 ch

The new AEROSEM seed drill concept combined with active tillage from PÖTTINGER combines high output performance with flexibility. Soil conservation and perfect placement of the seed are ...

Working width: 5'00"

... the optional small seeds box and plant two different seeds at the same time. The 3P500 is ground driven and features 4-speed gearboxes for fast seed rate changes. The rugged 00 Series ...

Working width: 300 cm - 600 cm
Power required: 80 ch - 110 ch
Weight: 954 kg - 1,178 kg

PRODUCT DESCRIPTION // TYPE PNEUMATIC SEEO-DRILL MOUNTED AND MOUNTED-TRAILED • - Mechanic adjustment of arms bar depth ( mounted version) • - Hydraulic adjustment of arms bar depth (trailed and mounted ...

Inter-row spacing: 25 cm - 75 cm
Power required: 60 ch - 140 ch
Working speed: 4 km/h - 8 km/h

... high-precision deployment. Soilmaster Coulter Type Pneumatic Seeder model can be use every kind of hard and stony field. If the seed plate is changed Soilmaster Coulter Type Pneumatic ...

Working width: 310 cm - 600 cm
Inter-row spacing: 45 cm - 70 cm
Power required: 100 ch - 150 ch

... FEATURES; Sowing Unit: Model with front pressing wheel for small seeds (beet, onion etc.) Sowing Unit: Model for coarse seeds (corn, sunflower, cotton, bean etc.) Sowing Unit: The seed ...

• Stainless Hopper • Electric Distributor with proportional monitor • Electric fan • Supports • Speed inductive sensor

Working width: 1,900 mm - 6,000 mm
Inter-row spacing: 450 mm
Power required: 40 ch - 90 ch

... they prevent the tractor or the machine from being damaged in the event that stones or roots get caught in them. Additional seed processing wheel which is required for the planting of products especially such as cotton, ...

Working width: 4 m

... sowing process. Discs cut surface of soil and insert seeds into regulated depth of slots. After that, wheels press ground around sowed seeds. Every disc tine has rubber amortization. DS has pneumatic ...

Working width: 3 m

Pneumatic seed drill Mandam MPS can be used both solo as a tractor-mounted machine or in combination with a Mandam APF pre-seeding agregate, GAL-P compact disc harrow, or any power harrow. ...

Working width: 6 m

The pneumatic seeder can bring out all small seeds and their mixtures from approximately 1 kg seeds per hectare. The seeds are transported pneumatically through the hoses ...

Working width: 1.9 m - 6 m
Inter-row spacing: 30 cm - 120 cm
Power required: 40 ch - 90 ch

With Minos Pneumatic seed drill, seeds belonging to the products such as corn, cotton, sunflower, beet, sugar, chickpea, bean, tomato can be sowed easily on the desired ...