Pumps

Flow: 330 l/min - 3,000 l/min
Pressure: 50,000 Pa
Power: 0.8 kW - 7.5 kW

... transmission and squared pumps to optimise heat dispersion. The three-way capillary oiler ensures precise oil dosing and no waste. TECHNICAL SPECIFICATIONS • Product category/Pump type: Belt driven ...

Flow: 430 l/min - 2,100 l/min
Pressure: 50,000 Pa
Power: 1.1 kW - 5.5 kW

... higher performance with less energy consumption. TECHNICAL SPECIFICATIONS • Product category/Pump type: Direct driven and oil-lubrificated vane vacuum pump • Rpm: From 1,370 to 1,400 • Available ...

Flow: 950 l/min - 2,700 l/min
Pressure: 50,000 Pa
Power: 2.2 kW - 5.5 kW

... to ensure reliable pump-forced cooling even at low rotation speeds. • Espcecially suitable for VARIOSPEED VCU drive. TECHNICAL SPECIFICATIONS • Product category/Pump type: Direct-driven and oil-lubrificated ...

... units with modem for a complete remote control; .Motor-pump unit on self-supporting frame with fuel tank; .JOHN-DEERE and IVECO-FPT motors; .Caprari / Rovatti / Sidermeccanica multi-rotor pumps, according ...

... units with modem for a complete remote control; .Motor-pump unit on self-supporting frame with fuel tank; .JOHN-DEERE and IVECO-FPT motors; .Caprari / Rovatti / Sidermeccanica multi-rotor pumps, according ...

... units with modem for a complete remote control; .Motor-pump unit on self-supporting frame with fuel tank; .JOHN-DEERE and IVECO-FPT motors; .Caprari / Rovatti / Sidermeccanica multi-rotor pumps, according ...

Flow: 250 m³/h
Power: 7.5 kW - 22 kW

CHIOR VPH Long-Shaft Cutting Pumps with suction from above and double chopping tool excel through their high pumping capacity and cutting efficiency. The design of the pump housing, either made of cast ...

Flow: 300, 280, 260 m³/h
Power: 18.5, 11, 15 kW

... CHIOR SPH Submersible Chopping Pump is designed to shred and eject long-fibre solids in livestock manure, biogas digestate and industrial wastewater. The powerful shear system is the heart of the unit allowing the pump ...

Power: 4, 5.5, 2.2, 3, 7.5 kW

... material is caused by an innovative cutting system that ensures optimum pump operation even under harsh working conditions. Its compact design and reduced overall dimensions make the pump easy to handle ...

Flow: 18 m³/h - 179 m³/h
Pressure: 3 bar - 11 bar
Power: 83 ch

... hydraulic power unit. STANDARD EQUIPMENT ​​•Motor IVECO F32 MNSA01.00 83 HP with Caprari pump MEC MG 80/A •ELCOS control box CEM 250 •Manual priming pump •Hydraulic kit for jack, turntable rotation ...

Flow: 18 m³/h - 168 m³/h
Pressure: 3 bar - 11 bar
Power: 126 ch

... hydraulic power unit. STANDARD EQUIPMENT •Motor IVECO N45 MSTA20.50 126 HP with Caprari pump MEC MG 80 4/3 A •ELCOS control box CEM 250 •Manual priming pump •Hydraulic kit for jack, turntable ...

Flow: 18 m³/h - 222 m³/h
Pressure: 3 bar - 11 bar
Power: 126 ch

... hydraulic power unit. STANDARD EQUIPMENT •Motor IVECO N45 MSTA20.50 126 HP with Caprari pump MEC MG 80 4/3 A •ELCOS control box CEM 250 •Manual priming pump •Hydraulic kit for jack, turntable rotation ...

Pressure: 2 bar - 16 bar

Irriland produces motor pump units for agricultural applications (e.g. irrigation by sprinkling, drip irrigation, pivot irrigation, etc.) and / or for industrial applications (e.g. motor pumps for fire-fighting ...

Elephump, the innovative configuration for motor pumps designed and patented by Irriland, which allows you to have a machine with a suction complex, up to 8 meters in length in a single piece, which can be folded on itself ...

Flow: 95 l/s

Flow: 0 l/min - 600 l/min

Clean water pumps are great for general water transfer, pool water removal, irrigation, and civil engineering. The pump housing and pump cover are made with durable aluminum alloy, along ...

Flow: 0 l/min - 900 l/min

Clean water pumps are great for general water transfer, pool water removal, irrigation, and civil engineering. The pump housing and pump cover are made with durable aluminum alloy, along ...

Flow: 0 l/min - 900 l/min

Functions of the flow distribution system: -tank filling; -mixing the contents of the container; -pipeline closing; -filling the sprayer using the same filling hose. Self-priming design makes your job much easier (requires ...

Flow: 60,000 l/h
Pressure: 2 bar

... LOMBARDINI DIESEL 15 LD 350 Pump: AUTOASPIRANTE VAC-3 Hose: 3 ” (75 mm.) MAX. height (pressure): 20 m. (2 BAR) Consumption: 2,1 L/H Tank: 4,3 L. Weight: 45 kg. Starter: hand start Dimensions: 550 x 450 x 550 ...

Flow: 30,000 l/h
Pressure: 5 bar

... LOMBARDINI DIESEL 15 LD 350 Pump: CENTRIFUGA S3 Hose: 1,5″ (40 mm.) MAX. height (pressure): 50 m. (5 BAR) Consumption: 2,1 L/H Tank: 4,3 L. Weight: 52 kg. Starter: hand start Dimensions: 550 x 450 x 550 mm. Water ...

Flow: 60,000 l/h
Pressure: 6 bar

... LOMBARDINI DIESEL 15 LD 440 Pump: CENTRIFUGA P-60 Hose: 2 ” (50mm.) MAX. height (pressure): 60 m. (6 BAR) Consumption: 1,8 L/H Tank: 5 L. Weight: 68 kg. Starter: hand start Dimensions: 650 x 500 x 600 mm. Water ...

Flow: 9,200, 8,200, 7,200 us gal/min
Power: 185, 290, 240 ch

The single 10” outlet operates at maximum efficiency, creating less turbulence and wear than multi-ported volute models. THE BIG GUN The 8” diameter cannon delivers high-powered, long distance agitation. BUILT FOR SAND Extra heavy ...

Power: 130, 180 ch

... to nothing in just seconds. COMBINES THE HIGH-VOLUME MIXING OF A PROPELLER AGITATOR with the power and reach of a lagoon pump. The resulting hybrid design radically out-performs both. THE BEST CHOICE FOR THE WORST ...

Power: 100 ch - 240 ch

... position to the tanker loading position from the seat of the tractor .After use, the POWER BOOM is self draining so the Ultra Pump can be packed up for transport within seconds, all without mess or spillage

Flow: 0.2 l/min - 0.29 l/min

Ambic acquired the RFE range of peristaltic pump products in 2013, adding dosing and dilution capabilities to its product range. RFE peristaltic pumps and pump assemblies have been produced ...

Flow: 0.25 l/min - 0.89 l/min

... the pump to transmit and withstand more torque which is more evenly distributed via dispersion amount the several planetary gears. This makes planetary gear motors well suited for applications requiring higher torque. Low ...

Flow: 0.95, 1.1 l/min

... highest quality chemical resistant materials. A key safety feature of the peristaltic pump is the fact that the pumped product only makes contact with the pump tube; the pumps also have ...

Power: 4 kW - 11 kW

... produces specific electric pumps for the distribution of liquid feed entirely built in stainless steel, robust, reliable and resistant to abrasion in different models and powers from 4 to 11Kw. To cope with the heavy ...

Flow: 900 l/min - 2,700 l/min

Vacuum pumps Vane pumps (900 - 2700 l/min). Loob pumps (1300 - 2700 l/min) The loob pumps have rotation pistons that do not touch. Because of this, it is ...

Flow: 5,000 l/h
Pressure: 5 bar
Power: 1.5 kW

The VP pump can be connected to the water flow heaters DH7 and DH5. The pump is required for a non-pressurized supply of water from water tanks or from natural waters, and for water supply from the public ...

Flow: 4,000 l/h
Pressure: 0.8 bar
Power: 0.6 kW

... can be automatically drained with the EP pump. The pump handles dirt particles up to a size of 10 mm and is installed in a stainless steel container. Technical data (Approximate values) Type Submerged ...

Flow: 7,000, 14,000 l/h

Milk pump model SM Model SM milk pumps are pumps designed to work with a standard motor. The existing bolts allow a quick and easy fixing to the motor. Available in capacities of 7,000 ...

Flow: 7,000, 14,000 l/h

Milk pump (clasic model) Our classic milk pumps ensure fast and efficient evacuation of milk from the final unit to the milk bulk tank. The body, the outlet, and the impeller of the pump ...

Flow: 18 l/min
Pressure: 0 bar - 20 bar
Power: 0.7 kW

... membrane pump has a flow capacity of 18 litres per minute at a maximum pressure of 20 bar. Comes standard with plastic pressure regulator unit with fixed calibration on three positions: 0 - 10 - 20 bar, with output for ...

Flow: 18 l/min
Pressure: 0 bar - 20 bar
Power: 1.8, 2.5 kW

... membrane pump has a flow capacity of 18 litres per minute at a maximum pressure of 20 bar. Comes standard with plastic pressure regulator unit with fixed calibration on three positions: 0 - 10 - 20 bar, with output for ...

Flow: 28 l/min
Pressure: 0 bar - 28 bar
Power: 1.5 kW

Electric motor-pump unit suitable for spraying fungicide liquids on plants and cultures in general, weed killing, pest control or in any other work where a non aggressive product must be sprayed. Single phase 230/50 Hz ...

Flow: 324 m³/h - 540 m³/h
Pressure: 10, 12.6 bar
Power: 2.5 kW - 119 kW

Slurry pump Pumps for chopping or grinding the slurry of your pigs, cows Intended for many applications, these pumps can handle charged liquids containing a high percentage of solids ...

Clear water pump for slurry Slurry pumps to treat uncharged liquids THE CLEAR WATER PUMP Clean water pumps are used to treat clean uncharged, non-aggressive liquids ...

Loaded water pump for slurry A slurry pump for the treatment of liquids with solid bodies THE SLURRY PUMP: WITH CHARGED WATER Charged water pumps are used to treat ...

Flow: 26 m³/h
Power: 0.8 kW - 1.1 kW

Multi-channel open impeller and double chopping system. •Chopping system. •Head 17 m •Discharge outlet: 40 mm

Flow: 110 m³/h
Power: 7.5 kW - 11 kW

Multi-channel open impeller and double chopping system. •Chopping system. •Head 29 m •Discharge outlet: 65 mm

Flow: 140 m³/h
Power: 2.2 kW - 18.5 kW

Multi-channel open impeller and double chopping system. •Version with double chopping system •Version with chopping system and anti-clogging screw press •Head 46 m •Discharge outlet: 80 mm

Flow: 13 l/min - 250 l/min

... versions of self-priming electric transfer pumps in brass. Equipped with an oversized single-phase asynchronous motor and long-lasting rotary switch, they are designed for heavy applications. These pumps ...

Flow: 13 l/h - 250 l/h

... professional versions of self-priming brass transfer pumps. Equipped with an oversized three-phase asynchronous motor and long life rotary switch, they are designed for heavy duty applications. These pumps ...

Flow: 58, 148, 28 l/min

The best solution for suction and transfer of liquids, thanks to the strong self-priming capacity and the ability to run even with discontinuous presence of the liquid in the suction. The ECC series, made of brass CB754S with DC motor ...

Power: 7.5, 11, 15 kW

SUBMERSIBLE PUMPS -They work completely inside of the liquid pool. It can be used on any level with the help of electric hoist. Easy to clean and make maintenance. -It can be used to transfer fertilizers with high ...