Reach mowers

Working width: 1,010, 1,040 mm

Working width: 60, 59, 39, 47 in

... tractors equipped with cabs only and protective screen material must be installed when using rotary mower heads. CONSTRUCTION FEATURES •All RMB Boom Mowers are equipped with hydraulic ...

Working width: 1.1 cm

AT-110 ROTARY ATV TOPPER 1.1M With the pedigree of the distinguished Wessex brand behind it, the Wessex AT-110 ATV TOPPER will perfectly complement ATVs and utility vehicles in both groundcare and agricultural applications. Developed ...

Working width: 1.2 m

... workspace is created. A standard model of the Grenadier is available with reach between 6.40 meters and 8.80 meters. On request, Herder can even develop arms which have a reach of 11 meters. Various ...

Working width: 3.2 m - 8.9 m

... professional solutions; Spearhead’s TWIGA series really is the first choice for all of your reach mowing needs. Spearhead boasts one of the most extensive fleets of reach mowers available ...

1. The verge flail mowers are designed for small tractors, power required in 18-30HP. They are used for the flat land grass, the weeds in the slope and bush side trimming. 2. The machine has passed the dynamic balance ...

Regular and continuous care of roadside vegetation is an important factor for the safety of all road users. The reflexion post mower MLM 200, which is specially designed for use around posts, crash barrier supports and ...

Hydraulic arm KR-600Z can be connected with almost every hydraulic head from ROLMEX,s offer. KR-600Z is designed for professional users and used in all ground conditions (even in the hard ones!). Thanks to its robust construction and ...

Working width: 1.2, 1.5 m

... small compact tractors to small pivot steer loaders, in conjunction with a front mount kit. Key Features: -3.2m or 3.5m reach -Left or Right hand cutting (swing over capability) -Cable or Electronic Proportional ...

Working width: 3,620 mm

Special chassis TITAN equipped with grass cutting head between trees GREEN-CUT. This system is recommended to work in young plants and also in already grown plantations. With the GREEN-CUT system you can totally eliminate the use of herbicides.

... arm geometry - Lightweight and compact - Wide range of working tools Spearhead Twiga Compact 320 and 420, is a compact reach mower designed for compact tractors. The Twiga can be used anywhere in the ...

Working width: 1.9 m - 2.3 m

... equipped with a flail mower head, either with a scanning automatic or with a manual control. A guiding post mower is available as an exchange unit for the mowing head. The max. reach ...

Working width: 1.6 m

... tow-path in one run in the most environmentally-friendly way possible? It can be done, simply and fast, with the Conver C36 mower-rake combination. The front end of a tractor is equipped with a mowing unit and the rear ...

To ensure the functionality and reliability, the machine Brushcutter and crawler hydraulic shredder ILF C1200 8.5 / 13 meters is built entirely at our plant. Specially designed for mowing grass, shrubs, for the maintenance of the green, ...

Designed for an annual use of between 300 and 500 hours the Dextra range of flail-mowers perfectly fulfils the requirements of local authorities, communities and vegetation maintenance contractors. Numerous NOREMAT ...

Working width: 600 mm - 800 mm

Two arm boom mower with two-directional cutting head engine, double high-performance hydraulic system, in-cab remote control system, mechanical shock. floating system head, roller adjustable in height, ...

Working width: 1,300 mm

•Thinnings banks of ditches and roadsides •Mowing a country road Brush cutter hydraulic arm with flail mover 1300 mm wide. Working area in front of the machine up to 4.50 m on escarpments and shores.

Working width: 1 m

... range: 1.30 m carry width. With a horizontal reach of 4.17 m, Arthéa is both easy to use and reliable. It is designed for tractors with at least 50 hp. Key features of the Arthéa arm mower - Compact ...

The Bradco Flail Mower has been engineered to handle your toughest vegetation management jobs. They are ideal for clearing vegetation on hillsides, roadways, ditches, utility right-of-ways, riverbanks, lakes and more.

Working width: 4.9, 5, 5.9, 6 m

... straight arm is available with a horizontal reach of 5 and 6 m. The first, more compact option is ideally-suited to mowing operations in narrow tracks. The second is ideal for jobs requiring a greater reach. The ...

SPECIFICATIONS Size 5 feet and Back Round Type Body Strongly reinforced 5 mm Sheet. Frame 75 x 40 mm Channel, 50X10mm Flat Linkage 3 Point linkage and lift flat 50 x 12 mm Gear Box Precision machined ...

Working width: 60, 50, 80 cm

Reach mower for tractors with low power (20-50 HP) ideal for hobbyists and small businesses. They are manufactured in 4 models reaching from 1.6 to 3,5 m (5,25’ to 11,5’) already fitted with double hitches ...

Working width: 5 m

Hydraulic string strimmer composed by 3 main parts (2 folding side ones and a central one) with 4 cutting drums and 3 hoses per drum. CHARACTERISTICS Maximum working width of 5.1 meters (drum diameter 1.3 meters). Heat exchanger ...

The shoot tipping machine / mechanical weeding machine was designed to eliminate the grass growing underneath grapevines and to cut off vine shoots (suckers). Wires in various materials can be inserted onto the rotor, with a simple and ...