Subsoilers

140 companies | 326 products
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
3-point hitch subsoiler
3-point hitch subsoiler
FKSS series

Width: 1,520, 2,510, 660, 1,220 mm
Working depth: 550 cm

•The sub soiler are deep tillage implements specially designed for breaking up hard pan layers and loosening the subsoil allowing better drainage, root growth and mineral osmosis. •Optional wide range of roller/ crumbler ...

5-shank ripper
5-shank ripper
FKR series

Width: 2,500, 1,810 mm
Working depth: 40 cm

•Ripper loosens and aerates soil while leaving organic matter at the top of the soil. •Reduces the effects of compaction. •Ripper cuts weed roots below the surface. •Optional wide range of roller/ crumbler available, which helps in ...

4-shank subsoiler
4-shank subsoiler
Helios Mono 60

Width: 3 m - 3.5 m
Working depth: 25 cm - 60 cm

Deep restructuring The Helios provides soil restructuring to 60 cm. It eliminates the results of extreme climate conditions as well as ground compaction resulting from grazing. It allows air and water to circulate again to bring life ...

See the other products
GREGOIRE BESSON
4-shank soil loosener
4-shank soil loosener
TL 3001

Width: 3 m
Working depth: 25 cm

The compact TL deep loosener with its 4 tines makes it possible to loosen the soil down to a depth of 25 cm. This enables AMAZONE to offer one-pass cultivation without ploughing as an option, even where high levels of straw prevail. Plough-less ...

5-shank subsoiler
5-shank subsoiler
STANDARD

Width: 180, 248, 315, 405, 495 cm
Working depth: 45 cm

The primary tillage equipment subsoiler; rips the deep soil layers. It tills the soil without turning over. It can be used in hard and cloddy soils. It breaks soil layers and cause healthy root growth. The pointed roller ...

See the other products
TOSCANO Agricultural Machinery
9-shank subsoiler
9-shank subsoiler
HDSR series

Width: 25'00", 22'00", 27'06"
Working depth: 6 in - 24 in

Introducing the all new HDSR line of Heavy Duty Staggered Rippers from Degelman. When your operation needs something more than conventional tillage, look no further. The HDSR offers aggressive, industry leading 24” maximum ...

3-shank ripper
3-shank ripper
A44412

Width: 500 mm
Working depth: 300 mm

... the attachment. The ripper is operated by pressing the three blades into the ground next to the object you wish to remove. When the teeth have sunk into the ground, tilt the ripper inwards and then ...

2-shank sub-soiler
2-shank sub-soiler

Width: 18 in - 24 in

Mahindra AppliTrac's subsoiler is a primary tractor mounted implement which offers maximum depth to loosen and break up soil. Most tractor mounted cultivation tools will break up and turn over surface soil to a depth ...

3-shank sub-soiler
3-shank sub-soiler
2511ZC series

Width: 2.3 m - 6.9 m
Working depth: 508 mm

The Brillion Zone Commander is a compaction management tool designed to address soil compaction issues within the growth profile in a controlled manner in a defined area. Designed from the ground up to meet the requirements of compaction ...

See the other products
Landoll Corporation
4-shank subsoiler
4-shank subsoiler
DURO_V series

Width: 3.07, 2.76, 3.68 m
Working depth: 55 cm

... compacted soil are crumbled and soil voids are formed. STABLE DRIVING A strong rubber wheel mounted in front of the subsoiler's working section stabilizes the machine's operation and reliably maintains the set working ...

See the other products
AGRO-MASZ Pawel Nowak
subsoiler with hydraulic adjustment
subsoiler with hydraulic adjustment
VT series

Width: 1.83 m - 7.72 m

With a choice of no-till or straight leg shanks, the Sub-Soiler eliminates yield-robbing compaction layers and soil density changes all in one pass. The Great Plains VT1500 Inline Sub-Soiler eliminates ...

3-point hitch subsoiler
3-point hitch subsoiler
S80

The S80 ensures an efficient drainage ! This subsoiler has been engineered with a straight tine of thickness 30mm, a share in high-strength steel and a draining ball Ø100mm. This design enables an efficient drainage ...

See the other products
Quivogne
5-shank subsoiler
5-shank subsoiler
SPIDER - S series

Width: 2.55, 2.65, 3, 2 m
Working depth: 50 cm

•Three point linkage cat. : 3°N - 2° •Tip with quick release device •Wear resistant shank protection •Adjustable inter shank distance •Hitch pins category 3°

See the other products
Moro Aratri
subsoiler with hydraulic adjustment
subsoiler with hydraulic adjustment
TFT series

Width: 3.2, 3.6 m
Working depth: 40, 30, 20, 50 cm

... Steel discs square 40x40 mm. Swiveling supports with two conical bearings with interchangeable crankcase, system ma/ag. • Subsoiler with hydraulic depth regulation. Anchors equipped with cut-off device with a sharing ...

See the other products
MA / AG Srl
11-shank subsoiler
11-shank subsoiler
MEGA series

Width: 6,000, 5,000 mm
Working depth: 600 mm

Mega is the trailed subsoiler with a folding frame with a working width of 5 or 6 metres: this model is ideal for large companies that have very high-power, up to 600 HP. The working width and the speed of up to 9 ...

See the other products
Dante Macchine
5-shank subsoiler
5-shank subsoiler
HIGHLANDER

Width: 300, 400, 200 cm
Working depth: 55 cm

Recommended Horse-Power (140 – 400 HP) Working Width (250 – 400 cm) The new TORTELLA Hydro-pneumatic subsoiler represents the latest innovation in rippers with minimum maintenance costs and independent ...

subsoiler with hydraulic adjustment
subsoiler with hydraulic adjustment
CombiMaster 300

Width: 3 m
Working depth: 0 cm - 30 cm

Subsoiler and seedbed preparation in one. Ideal for stirring the soil and preparing a coarse seed bed. With an optional hitch device it is possible to mount a seed drill. This makes it possible to perform 3 operations ...

3-shank subsoiler
3-shank subsoiler
KARINCA series

Width: 1,600, 2,500, 3,400, 4,300 mm
Working depth: 45 cm - 85 cm

... a significant decrease in product yield. To break this layer, Cansa Subsoiler (Karınca) will work 45-85 cm depth in the soil. Comparison to tillage machine (25 cm depth), subsoiler can work deeper than ...

subsoiler with hydraulic adjustment
subsoiler with hydraulic adjustment
Combi-Digger

Width: 3 m
Working depth: 20 cm - 50 cm

SINGLE BEAM CURVED TINES. Use as a pre-loosener (in front of a rotary harrow or disc mulcher or as a solo device). The steep alternating tips ensure good ventilation in the depths of the soil without mixing the soil horizons. Standard ...

3-shank subsoiler
3-shank subsoiler
Panbuster™ X Series

Width: 2.4, 2.7, 3 m

Our top of the range machines use an accumulator each side of the reset rams. The main accumulator is a super reliable piston accumulator and the second accumulator eliminates the breather so we don’t have moisture/condensation forming ...

3-point hitch subsoiler
3-point hitch subsoiler
MCC 11/13/15 SERIE

Width: 129.92 in - 216.53 in

Designed to rip and remove in one step and completely any terrain permitting a deep penetration breaking up the topsoil and shatter, providing oxygen to the earth. DESCRIPTION The rudders move at any distance between the tips on two ...

See the other products
Bison
4-shank soil loosener
4-shank soil loosener
Combiplow Gold

Width: 3.5, 4, 3 m
Working depth: 15 cm - 35 cm

Today, Combiplow Gold is the recognised and undisputed reference machine on the market. Combiplow Gold is a combinable soil loosener : it has been designed to be inserted between the tractor and an implement such as ...

See the other products
AGRISEM International
3-point hitch subsoiler
3-point hitch subsoiler
RepTill series

Width: 111 cm - 221 cm

... and mechanical weeding in a single pass, saving several passes needed with other traditional tools such as cultivators, subsoilers and cutters. The front row of discs prevents the arms from getting stuck. In turn, the ...

subsoiler with gauge wheels
subsoiler with gauge wheels
KRET series

Width: 3, 4, 1.7, 2.8 m

Sample equipment •suspension axles: ø70-825/ø36 mm (3 & 5), ø70-965/ø36 mm (7) •200×100 mm rigid frame •L type tine •bolt-protected tines (B) •Non Stop double spring protection (S) •coulters with wings and undercutting width of ...

3-shank sub-soiler
3-shank sub-soiler
DP3DR

Width: 2.45 m
Working depth: 60 cm

Parallel double V-frame made of high-grade steel tube with a large cross-section to ensure good load distribution on each beam. Third point triangle and tubular, non-deformable counter plug. The blade supports are made of high resistance ...

See the other products
Jaulent Industrie
soil loosener
soil loosener
RP//RP-B//RP-T

Working depth: 80 cm - 110 cm

MAIN TECHNICAL FEATURES: Chisel in microalloyed heat-treated steel Sturdy and strong structure made by certified materials Safety bolt system Hydraulic cylinder with safety valve OUR STRENGHT Structure made by heat-treated materials Chisel ...

exhibit your products

& reach your clients in one place, all year round

Exhibit with us
AgriExpo RFQ: Free quotation comparison tool
Receive and compare quotations for free
Describe your project
We select
the best suppliers
Compare quotations and complete your purchase