Subsoilers with rollers

Width: 2.5 m - 3 m
Working depth: 10 cm - 25 cm

Cultiplow Silver is a soil loosener equipped with TCS 650 and 740 offset blades mounted on shear-bolt or auto-reset security.

Width: 111 cm - 221 cm

... cultivators, subsoilers and cutters. The front row of discs prevents the arms from getting stuck. In turn, the work of the arms favours intense mixing and incorporation of the surface residue by the discs. The Reptill ...

Width: 3, 4, 1.7, 2.8 m

... spring-leaves reinforcement package •roller bracket (only B – bolt protected version) •roller bracket (only S spring protected version) •Pipe roller ø600 mm •Spiral roller ...

Width: 3 m
Working depth: 60 cm

... most difficult conditions. The shares are made of forged and hardened steel. The roller is of mixed bar and disc design and covers the whole working width, or packer roller. They are mounted on Timken® ...

Width: 3, 4, 5.5 m

... interchangeable system ma/ag. • CBL: subsoiler group with curved anchors type “Michel” H 800 mm with safety device by shear bolt. Reversible shares and interchangeable wear protections. • RDP CBL: Rear double breaking ...

Width: 900 mm - 3,000 mm
Working depth: 400 mm - 800 mm

The Segues SV & Tigre subsoilers are made for the easy stronger soil’s layers movement, with a minimum fuel spent and all the benefits that it provides to the culture: oxygenation and soil’s water storing capacity improvement. ...

Width: 250, 300 cm
Working depth: 50 cm

... double geared roller. Strong Tine Structure : Tines are produced for maximum strength and are resistant to harsh conditions and impacts. The safety bolt shear resistance of the tines during driving is 650 kg. Safety ...

- Adjustable tines on frame - Safety bolt Optional: depth wheel couple, double spiketooth roller, wheeled forecarriage, exploders

Width: 1.5, 1.8, 2, 3 m

Width: 2.35, 1.35 m
Working depth: 600 mm

The Schmeiser Mid-Row Ripper isn't just an ordinary ripper. It's more like a root zone management system with impressive results and tremendous acceptance for use in both vineyard and orchard applications. Its 'U' shaped, ...

Width: 2,500, 3,000, 4,000 mm

The carachteristics of our subsoilers are the following: they plough deeply – they break the compressed layers – they maintain the organic equilibrium – they help the drainage of water – they oxygen the soil – they prevent ...

Width: 3 m - 6 m

Move towards a zero-till crop establishment system using the UK’s first Low Disturbance Subsoiler. This machine alleviates subsurface compaction with minimal surface disturbance, significantly reducing grassweed germination. -Create ...

Width: 2,000, 3,000 mm
Working depth: 25 cm - 50 cm

... the line of work "rat", loose surface after the formation of vegetation The integrity of the suppression of heavy pressure roller to improve soil moisture effect, the greatest degree of soil moisture loss, more conducive ...

Width: 3 m
Working depth: 15 cm - 45 cm

Width: 250, 350, 450, 550, 650 cm
Working depth: 50, 60 cm

Third point 2 cat. Antiwear anchor protection. Reversible chisel. Depth of anchors 20-50 cm. Distance anchor 50 cm.

Width: 140, 170 cm
Working depth: 20, 70 cm

... due to ordinary work. It differs from traditional subsoilers because it lifts the soil evenly, thanks to the curved anchors that do not damage the turf. In addition, after cutting, the rear roller ...

Working depth: 30 cm

Available in 5 or 7 teeth configurations, the bed decompactor works in-depth (approximately 30 cm). It breaks up the hard undersoil to allow water to infiltrate and ensure better soil ventilation.

Width: 1 m - 5.6 m
Working depth: 450, 600, 550, 650 mm

Gascón has got a wide range of models from 1 to 11 shanks, of different structures, each of them very strong.

Width: 2 m - 3.57 m
Working depth: 30 cm - 62 cm

Asa Laser subsoiler soil operations are vibrating. This feature increases soil decompaction between the crop rows and reduces the required power of up to 10% in relation to other subsoiler equipment. ...

Width: 2.5 m - 3.5 m
Working depth: 0 cm - 50 cm

... a perfect surface is obtained as a result of the soil breaking, compacting, and leveling operations using a double geared roller. Strong Tine Structure ATLAS tines are produced for maximum strength and are resistant ...

Width: 2.4, 2.9 m

With increased light frame equipped with a manual circuit loading pump. -HYDROPNEUMATIC -INCREASED LIGHT FRAME

Width: 2 m - 5 m

... 2,4m - work width 4 and 5 tine width up to 3m - No. of tines: from 2 to 5 - 900mm clearance under the frame - rear mounted roller with a diameter of 500mm with variable depth - working depth up to 600mm - fuse protection - ...

Width: 200, 250, 360 cm
Working depth: 60 cm - 80 cm

- Pair of wheels depth-adjustable support - Mechanical system for side blades Reentry (only for RIP.7) - Hydraulic system for side blades Reentry (only for RIP.7)