Tines harrows

Working width: 6.1 m - 12.1 m

... effective use of minimum tilling and direct drilling -Can be operated with either 75mm tine spacings or 150mm by hydraulically removing every other row of tines. Useful for higher volumes of harvest ...

Working width: 1 m - 14 m

Working width: 110, 160 cm

The horse arena harrow is designed to smooth and level sandy or mixed media horse riding surfaces. The harrow features multiple processes, beginning with the two sets of spring tines ...

Working width: 12.2 m - 27.4 m

... in transportation safety. Rite Way Heavy Harrow Features •Parallel Linkage Arms with double heavy-duty springs apply equal pressure to all four corners of the harrow section. •Hydraulically adjust ...

Working width: 3, 6, 7.5, 9 m

... levelling on stony soils), and hydraulic adjustment of the tine aggressiveness and pre-pressure. TECHNICAL DATA Weight in kg:650 / 1180 / 1350 / 1470 Number of tine rows:3 Tine ...

Working width: 5, 6 m

... cultivator The frame is designed without compromising the distribution of the harrow tines. A CULTITRAIL, therefore, has a perfect tine configuration with at least 400 mm to the nearest ...

Working width: 6, 7.5, 9, 12 m

Mulch harrow – a weeder is designed for the mechanical destruction of weeds in crops, and when mounted on the last two rows of tines, special harrows are used for the care of meadows ...

Standard equipment • 3-point linkage cat. II and III • 5 rows of spring tines • Spring tooth with a diameter 16 mm and a length 750 mm • Hydraulically adjustable depth of harrow tines ...

Working width: 600, 700, 800 cm

... on the customer's needs. With the narrow tine spacing, the harrow cultivates the soil in a very aggressive way and leaves a very fine seedbed for the crop. On the other hand, the 12cm tine ...

Working width: 3,000, 4,000, 5,000, 6,000 mm

This harrow is equipped with square springs with teeth that are not fixed but rather elastic to offer a function between that of a extirpator and a traditional fixed-tooth harrow. This harrow ...

Working width: 1.4 m - 15 m

... EQUIPMENT Operating components: -5 rows vibrating tines placed in 61 mm distance; -Wire diameter of tine elements 14 mm (16 mm optional). Securing: Resilient monolithic frame without fixed ...

Working width: 7.8 m

The Rangler III is a wing-up packer harrow bar. Attach it behind your air seeding system to seed, pack and harrow at the same time. The Rangler III saves valuable time, labor and fuel during your seeding operation.

1. The teeth harrow refers to a grass harrow with straight steel teeth set in horizontal bars. 2. Pointed metal spikes which can stir soil High carbon steel are bolted into bars. 3. Direction ...

Working width: 200 cm

HM200 uses for stud-farm to remove any tree branches or wastes. This will prevent horses from hurting.

Working width: 300, 380, 460, 640 cm

Disc harrow is a well-known, powerful basic harrowing machine. Both the method and the Hankmo brand go back 100 years. Hankmo’s sharp blades penetrate the soil effortlessly without tamping the soil, unlike plate disk ...

Working width: 400, 450, 500, 600 cm

... power harrows equipped with a special self-supporting frame in high tensile steel. lts great reliability and working width from m 4 to 8 enable you to reach remarkable per-hour productivity levels. An hydraulic device ...

Working width: 7.3, 9.8, 12.3, 6.2, 8.6 m

... such as : -high working rate -low fuel consumption -reduction of herbicides use HYDRAULIC REGULATION Tines angle of the 5-row harrow can be adjusted hydraulically from the tractor’s cabin. The ...

Working width: 2.3, 3.8, 4.8, 5.8 m

Erpiflex is a meadow and pasture harrow, devised to improve productivity and regeneration of the lawn. Produced with a fixed frame, folding either manually or hydraulically, ERPIFLEX is fit for mountain or plain. Easy ...

Working width: 6 m

The grassland harrow in connection with leveller bars make a perfect combination to level mole hills, breaking down of manure and airing of the turf. The flexibility of the harrow sections, fitted with ...

Working width: 2,650, 3,000, 4,000 mm

Working width: 2 m - 3 m

... solidified soil. Since no loose clods can pass through the power harrow tines, the area performance can be increased by a higher driving speed. APPLICATION -together with the power harrow -before ...

Working width: 155, 175, 195 cm

Category 1 or 2 -three point linkage. Width of variable work. Possibility of choosing ploughshares: Ploughshares with crow's feet Ploughshares scarificator Ploughshares knives

Working width: 3, 4, 6, 8 m

... machine. Three row drag harrow comes first, hanged freely from top of the frame, to provide great ground copying and lots of clearance. Drags are followed by three row tine section. Equipped with 10 mm ...

Working width: 300, 440, 580, 620 cm

... lighting in the front 2 operations in 1 pass; levelling bars and harrow tines the levelling bars are spring suspended and height-adjustable two rows of heavy-duty (12mm) harrow tines ...