Other pumps

Flow: 1,300, 1,200 l/min
Pressure: 210 bar

Rugged, self priming centrifugal pumps with hydraulic motor for filling or transfer of large tank volumes Technical -3" inlet/outlet threads Technical data hydraulic motor: -max. 49 l/min oil flow

Flow: 25 l/min - 72 l/min
Power: 8 ch - 13 ch

two tyre galvanized frame with manual handle to move the motor pump, standard engine drive and hand starting, suction and delivery flanges on the pump.

Flow: 76.4 l/min
Pressure: 30 bar
Power: 5.4 ch

Semi-hydraulic three-diaphragm pump. For use with aggressive chemicals. Parts in contact with spray liquid re-inforced nylon, Kynar and stainless steel 316L. Diaphragms in BlueFlex™. O rings in Viton®. Three diaphragm design ensures smooth ...

Pressure: 350 bar

The PAM-S 20 series hand pump is a manual hydraulic delivery pump that is suitable for feeding single acting hydraulic cylinders. The pumping cycle is double acting, i.e. it generates pressure in both movements of the lever. This model ...

Flow: 10 l/h - 2,500 l/h
Pressure: 0.3 bar - 6 bar

The D25+care product line is the new high-value Dosatron Standard for Animal Health applications, for flow from 10l/h to 2.5m3/h .Accurate, reliable and homogeneous dosing of vaccinations and treatments in drinking water .Certified ...

Flow: 0.01 l/h - 18 l/h
Pressure: 10 bar - 260 bar

The ORLITA Evolution mikro is an innovative micro-metering pump for high pressures. The hydraulic diaphragm metering pump is the first of its kind with an electronically regulated linear direct power end. The power end has few mechanical ...

Flow: 0.2 m³/h - 7 m³/h
Power: 1,500, 300, 600, 900 W

The 3” WPS® PMM solar pumping pack is best solution in the market for solar pumping systems in 3” narrow wells. This pack is a perfect combination of long-lasting products with high efficiencies. The 3” WPS® PMM solar pumping pack ...

Flow: 535, 725, 215, 245, 365 l/s

Pressure: 160, 190, 200, 210, 220 bar

Dagso’s water pumps for agriculture are designed to withstand tough loads and deliver the highest efficiency. Pumps from the Robusta line have reinforced internal walls and are also able to handle slurries loaded with suspended abrasive ...

ALINOX series stainless steel submersible well pumps are multi-stage centrifugal type and designed for best efficiency. Components are manufactured from high grade non-magnetic corrosion resistant 304/316 Stainless Steel. These stainless ...

Pressure: 150 bar - 270 bar

VINCKE CLOCKWISE THREATED GEAR PUMPS GROUP 1, EUROPEAN FLANGE, CON. SHAFT 1:8

Our centrifugal mutlistage electropumps are silent, efficient, can be used and installed in water supply systems, washing, fire protection, conditioning and cooling systems, irrigation and pressure boosting. They are designed for several ...

Flow: 100 l/min - 5,500 l/min
Pressure: 10 bar
Power: 1.5 kW - 37 kW

Monobloc horizontal centrifugal pumps, constructed in compliance with EN 733 standards; widely used in water supplies, pressurisation and fire-fighting systems, cooling, heating, irrigation, industrial and agricultural applications; standard ...

Flow: 1,260 l/min - 8,100 l/min
Pressure: 2.5 bar
Power: 3.5 kW - 16 kW

The reliability and strength of the MEC is the result of continuous design and manufacturing improvements accomplished during 40 years of deployments. It’s simple and practical design made the MEC pumps the product of reference for ...

Flow: 77.18 m³/h - 454 m³/h
Power: 213 kW

A.TOM PUMP 290 stations are designed for pumping of liquid manure, liquid effluents from storage facilities and its subsequent application to the fields as organic fertilizers. Technical features of Cornell 4NHTB pump Discharge ...

Flow: 180 l/min
Power: 1 kW

Flow: 210 l/min
Power: 2.9 kW

Our ZEN gasoline water pumps, with their lowest weight in the range, are useful for transferring, low pressure irrigation and clear water spraying. They are also equipped with “OIL ALERT” device. Diam. Suction - 40 mm (1"1/2) Diam. ...

Flow: 5 l/min - 70 l/min

Startec pumping groups have been specially developed to guarantee the maximum adaptability of kits for the distribution of liquid products. The range includes both electric and hydraulic pumps, with flowmeter and agitation and covers ...

Flow: 0 m³/h - 38 m³/h
Power: 5.5 ch - 35 ch

It is especially preferred for wells which are not well-improved and have high amounts of sand and for irrigation practices. The wall thickness of cast fan and diffusors provide for durability and long life against the abrasion resulting ...

Flow: 79 l/min
Pressure: 50 bar
Power: 7.3 ch

Number of Membrane 3 Power Hp 7.3Cycle RPM 540 Weight kg 17,5

Flow: 450 m³/h
Pressure: 16 bar

Blockpump Single Stage Pumps – LSB Single stage end suction pump in close coupled (block) design, based on the hydraulics acc. to ISO 2858, with direct mounted IEC motor, design B5.

Flow: 900 l/min - 2,700 l/min

Vacuum pumps Vane pumps (900 - 2700 l/min). Loob pumps (1300 - 2700 l/min) The loob pumps have rotation pistons that do not touch. Because of this, it is not needed to lubricate them. Both the vane pump and the loob pump can ...

Flow: 250 m³/h
Pressure: 12 bar
Power: 205 kW

MOBILE SLURRY PUMP FOR DEMANDING PUMP JOBS High-performance and mobile pump unit for continuous slurry pumping. Used to supply the SRS 1200 slurry injector and SDS slurry spreader with slurry, or for the filling of a nurse tank. High ...