Milking equipment washing system Powerflush

automaticwith backflush systemwith controller

The ATL PowerFlush backflush system reduces labour by automatically cleaning the cluster after each and every cow is milked. How it works Step 1 The PowerFlush is a backflush system that helps prevent cross contamination by automatically cleaning the long milk tube, claw and liners after each cow has been milked Step 2 The system is triggered when the cluster is removed by the ACR using either an electronic signal or vacuum sensor Step 3 A water / peracetic acid mix is then introduced into the long milk tube, followed by a blast of compressed air, providing a vigorous flushing action cleaning the long milk tube, claw and liners Step 4 The flushing cycle can be set to occur twice or three times; Step 5 A final blast of compressed air removes the last of the water / peracetic acid mix and the cluster is ready to be attached to the next cow; Step 6 It does not require a change to the liners and does not change operator routine or extend milking times as the process occurs automatically without any intervention. System Features Suitable for use with most types of parlour and most manufacturers systems fitted with ACRs or milk meters. Electronic initiation as standard. Vacuum initiation option means no wiring is required into the ACR control, removing any potential issues with ACR warranty. A manual system is also available for parlours without ACRs or milk meters.