Towed manure spreader N-233/5

horizontals beaterssingle-axle

.Wall height 750 mm with thickness 2mm – hot-dip galvanised. .A2HS adapter – 2 horizontal worm drums – hot-dip galvanised .Exchangeable floor made of hot-dip galvanised flat sheet .Hot-dip galvanised two-position drawbar for connecting to the tractor’s lower or upper hitch with replaceable eye, drawbar approved in accordance with Regulation 2015/208 .Mechanical drive of the conveyor from the PTO shaft with 9-step adjustment .Hot-dip galvanised adapter cover .Hot-dip galvanised front guard, meeting safety requirements .Bolted drawbar diam. 50 .“Hot-dip galvanised bottom frame made of metallurgical 160 channel sections .Hot-dip galvanised bottom frame made of metallurgical 160 channel sections” .Straight drawbar support with collapsible steel wheel, partially hot-dip galvanised .Hot-dip galvanised conveyor chain, link diameter 11 mm .Exchangeable, hot-dip galvanised conveyor strips made of 50x25x3 profile .Parking handbrake with crank .Star wheels made of spheroidal graphite iron .Lighting installation connector cable with 7PIN 12V plug .Lighting 12V, homologated, bulb rear lights, LED front lights, contour reflectors .Single-line pneumatic brake system .New 400/60-15.5 wheels .Axles from renowned ADR company, full beam with 70 mm square cross-section, 300×60 brake .Two wheel chocks placed in galvanised pockets .Rigid suspension ADDITIONAL EQUIPMENT .Hot-dip galvanised volume extensions with rear gravity fl ap – height 500 mm * (* it is not possible to mount the extensions together with the adapter) .Rear wall, 500 mm high, hot-dip galvanised (board, mounted in place of the adapter) .Hydraulic drawbar support .Hydraulic rear wall (in front of adapter) .Full LED lighting