Low carbon barbless wire

Application For the manufacture of nails, bindings, fences, wicker nets. Diameter 0,5 - 13,00 mm Steel grade St1, St2, St3 of all degrees of deoxidization are according to DSTU 2770-94; 1006, 1008, 1010, 1011, 1012, 1013, 1015, 1016, 1017, 1018, 1020 are according to SOU MPP 77.140-236; С4D, С7D, С9D, С10D, С12D, С15D, С18D, C20D are according to DSTU EN 10016. At the customer’s request it is possible to produce the wire with more strict requirements regarding the geometry and tensile strength, without oxide scale in the "light annealing" mode. “Brehmen rings” Production of heat-treated wire is possible in coils of rectangular section – “Brehmen rings” with the following technical requirements: - diameters from 2,00 up to 5,00 mm; wire oiled/not oiled; - tensile strength 300-400 N/mm2; - the production of oiled wire is possible. Coils with a special winding shape weighing 200 grams Production of heat-treated wire is possible in coils with a special form winding of weight 200 grams with the following technical requirements: - diameters from 1,2 mm; 1,4 mm; 1,6 mm; wire not oiled; - tensile strength 300-490 N/mm2;