Tree spade Truncated Series

Historically, most smaller tree spades were manufactured in a 22-degree, truncated style meaning, the angle of the blades, and the angle of the towers are set at 22-degree. This will allow for a more upright cut on the root ball and allow for a wider bottom base. This style of spade is ideal for shallow-rooted trees and clay-base soil conditions. The clay soil will lock in even when the opening on the bottom of the spade is larger. Due to the wider opening, there is less ability for the spade to downsize to dig smaller root balls. Typically, the 22-degree, truncated spade will allow the operator to dig two sizes of root balls comfortably. Dutchman’s truncated spades can be built from 24” to 33” (inside and outside frames) and are generally built on an order by order basis. Please note that 22-degree baskets must be purchased if you are you use this style of spade Dutchmans 20-inch, 22-degree tree spades are produced in both inside and outside frames. This type of spade is great for digging small, 3-4 foot coniferous trees in narrow areas as well as moving small shade trees less than 2-inches. It is also ideal for smaller loaders with limited lift capacity. The spade digs from 20 inches to 18 inches. Weight of the outside frame is approximately 1100 lbs. Dutchmans 24-inch, 22-degree tree spades are produced in both inside and outside frames. This type of spade is great for digging small, 4-5 foot coniferous trees in narrow areas as well as moving small, 2.5-inch shade trees. It is also ideal for smaller loaders with limited lift capacity. The spade digs from 26 inches to 20 inches.