Agricultural telehandler EWORKER 25.5 - 60 (2WD)

Everything at your fingertips. The 2WD models are equipped with two electric motors directly fitted on the front wheel reducers, ensuring front traction and reducing power required for transfers. This solution ensures maximum machine autonomy; the rear axle is free to oscillate up to 7 degrees, and the maximum pull force is 2.000 kg. The eWorker only steers on the rear wheels, like lift carriers with forks. Making the most of the high steering angle of the wheels, that reaches 85°, the maximum encumbrance while steering is reduced to a minimum: 2.750 mm for 2WD models. In this way the eWorker ensures greater agility, manoeuvre and transfer speed, and the best steering radius in its category. A compact all-rounder! The transmission features three modes of use, depending on the customers’ needs. ○ ECO:for maximum saving ○ NORMAL:for normal operating conditions ○ POWER:for maximum performance and power. The machine is configured with a variable displacement (Load Sensing) hydraulic pump, coupled to an electric motor and controlled by a capacitive electronic joystick control able to ensure up to three simultaneous movements without any problems for the operator. The RRM hydraulic couplings developed and produced by Merlo guarantee quick assembly and high connection tightness. This fully automatic solution allows the weight of the boom and load to be used for the lowering movement, significantly limiting the demand for hydraulic power and, consequently, consumption and noise, without reducing safety. Faster and more fluid movements allow for increased performance.