Road leveler GT-HY

front-endhydraulic

Fransgård's hydraulic (HY) levellers are used for efficient levelling of soil, clearing of snow and smoothing of roads. The leveller has been developed and designed according to know-how accumulated over many years of experience with mechanical levellers. The quality is high as the leveller is Made in Denmark at our own factory in Farsø. Flexible and strong The powerful hydraulic cylinder is well protected on top of the boom and ensures easy blade travel of up to 244°. The machine has mechanical offset adjustment of 55 cm to the right or left without using tools. The blade is prepared for the installation of wide support wheels that can be offset to create a sloping road surface, thereby diverting rainwater away. Side plates can be fitted on the right and left sides to hold the material, and a snow blade can be fitted on the right side to cut the edge diagonally so that the snow does not fall out behind the blade after driving. Blade, rear Strong blade with reinforcements at the rear. The lower reinforcement at the rear is designed so that you can reverse the leveller without turning the blade and you will be able to reverse over any excess material, for example, when you come to an asphalt road and the leveller will press and distribute the material out into the road. 3-point suspension The lift arms can be mounted in 2 different heights to fit most tractors. If the lifting arms are mounted in the lower hole on one side and the upper hole on the other side, the blade will have a horizontal cutting angle of approximately 7 degrees.