Road leveler GT-T

front-endhydraulic

Fransgård's GT-210T and GT-250T mechanical levellers are built to a high quality in our own factory in Denmark. The design is made specifically for easy and quick mounting on all types of forklifts. It is suitable for scraping soil, clearing snow and levelling roads and car parks. Technical refinements increase utility value The leveller is adjustable 244° in 10 positions. The adjustment is done without using tools. The cutting edge is prepared for mounting wide support wheels that can be offset. Side plates can be fitted - on both the right and left sides - to hold the material, and a snow blade on the right side to cut the edge diagonally so snow doesn't fall out behind the blade after driving. All features that give a good result. Blade rear Strong blade with reinforcements at the rear. The lower reinforcement at the rear is designed so that you can reverse with the leveller without turning the blade, and any excess material, for example, when you come to an asphalt road, you will be able to reverse over and the leveller will press and distribute the material out into the road. Blades Reinforced ends on the blade of the leveller, which are also prepared for mounting the side flap and snow blade. Prepared for wheels The leveller is prepared for the installation of wheel sets item no. 2512 or 2513. Support legs The support leg ensures stable parking and is easily lifted up while working with the cutting edge, so you always have it with you when parking the leveller again. Main axle boom The blade and boom are assembled with a strong 75 mm main bolt. Pivot The pivot on the blade has 10 settings and the blade can rotate 360 degrees.