Road leveler GT-HNZ

hydraulic

Fransgård's hydraulic GT-250HNZ and GT-275HNZ levellers are used for efficient levelling of soil, clearing of snow and smoothing roads especially in very hilly landscapes and where often only smaller tractors (max. 120 hp.) can be used. The construction is lighter than our DKH models, but it comes with many of the same features. Many settings and options The machine is manufactured with a high basic weight, partly via the heavily manufactured blade with a 75 mm connecting axle. The blade is hydraulically rotatable up to 244° as standard and can be mechanically tilted 55 cm either to the right or left. The three-point suspension is standard mechanical with the possibility to adjust the horizontal cutting angle by +/- 20°. A hydraulic suspension can be purchased, further increasing flexibility. Interchangeable levelling plates are fitted as standard. Top bar attachment The top bar attachment has both a fixed hole and an elongated slot, where the top bar bolt can usefully be mounted for, e.g., when levelling roads. This way, the leveller will better follow the terrain and a better end result is achieved. Manual horizontal setting The horizontal cutting angle can be set in 5 positions as standard; up to 17 degrees to each side, without the need for tools. A hydraulic cylinder (item no. 2515) can be fitted as an optional extra. Support legs up The support leg is easily lifted and secured in the holder during work, so you always have the support leg with you when you need to park the leveller again. Hydraulic hose holder The leveller is fitted with a holder for the hydraulic hoses as standard.