Monojet micro sprinkler 831/831PC

flow-regulated

DYNAMIC MICROSPRINKLER WITH BRIDGE (PC with flow regulator) This sériés of minisprinklers “with a single bridge’ and high performance is characterised by a robust design and an anti-insect protection device that closes the sprinkler at the end of the work. It offers a vast sprinkling diameter. Applications: •Designed to irrigate mature trees with a vast root System, idéal for vineyards and orchards. •Thanks to the high uniformity and large sprinkling diameter, the sprinkler can be installed between two trees. •Idéal for overlapping use in greenhouses or on vegetable, allowing high uniformity and low précipitation. •Suitable for cooling and frost-free protection of greenhouses and nurseries. Characteristics: •Vast range of nozzles to meet ail applications; from 16 to 240 l/h. •Nominal flow rate at 2.0 bar. •Optimal working pressure; from 1.0 to 2.5 bar. •Anti-insect, sprinkler closes at the end of the work. •Single-jet rotor with strong propulsion; works without setbacks even in difficult conditions. •Ample sprinkling diameter: 5.5-10.4 m. •Recommended spacing in areas protected from wind: up to 6X6 m. Arranged on a row up to 6 m wide in the greenhouse. Arranged over two rows up to 12 m wide in the greenhouse. •831 PC with flow regulator. •Water and energy savings: the sprinklers can work at low pressure (up to 1 bar) and low capacity. •Conical plunger f. •Assembly on stand STDA1 with rod 0 6mm or wedge 35cm ID10157 (pic.4). •Recommended filtration: 100mesh=150micron for flow rates up to 40 l/h 80mesh=180micron for flow rates up to 90 l/h 60mesh=250micron for flow rates up to 160 l/h.