Mounted wood chipper HJ262

stationaryPTO-drivenwith crane

The Junkkari HJ262 is the only direct-feed chipper in our range. Its advantage is small and very high-quality wood chips, which is also suitable for smaller stokers. This robust chipper, which can be mounted on tractor linkages, chips wood up to 26 cm in diameter. Very high quality wood chips Unlike other models, the HJ262 chipper’s infeed chute is at a 90 degree angle to the blade. The chip size is smaller and the chips are very uniform. The chips break up differently from the diagonal feed and the distance between the feed rollers and the blades is as small as possible. The first-class chipping quality of the straight-feed chipper is also suitable for smaller boilers, as the chipper cuts the wood cross-sectionally. The wide adjustment range of the blades allows the HJ262 to produce larger chips if required. The power consumption of the direct-feed model is about 20% higher than the corresponding diagonal-feed models. Under optimal conditions, the HJ262 can chop up to 30m3 per hour. Hand feed or crane feed The HJ262 model is equipped with two horizontal feed rollers. The advantage of two feed rollers is particularly beneficial with airy brushwood, which it is able to feed efficiently towards the blade. In the G model, the rollers are powered by the tractor’s hydraulics and their rotation speed is steplessly adjustable with a valve on the chipper. The G, GT, GTC models are all tractor-driven chippers. The difference is that the G model requires from the tractor one pair of hydraulic blocks in addition to the PTO drive and the electric socket for the feed unit.