Towed wood chipper HJ500

wheeledPTO-drivenwith crane

Junkkari HJ500 is a high-power trailed chipper for chipping trees of up to 45 cm in diameter. It is excellently suited for contractors and holds its ground against drum chippers in the same size category. A significant advantage of HJ500 is its very low power demand considering its production and its highly competitive price. The chipper is usually sold on a chassis with 1 axle and no brakes, but is also available as a single chipper unit, for example for fixed installations. Optimal feed angle for high output The feed opening of the HJ500 chipper is in a 45-degree angle in the front of the chipper. The tractor operator has an excellent visibility from the cabin towards the feed opening, so that the chipped material is easy to control and working is smooth and effective. At best, the HJ500 chipper produces more than 100 cubic meters of chips per hour. The quality of chips is even, and the chip size can be adjusted steplessly as needed. Crane mounted contractor chipper The HJ500 model with feed chute has two horizontal feed rollers. Alternatively, a conveyor mat can be selected to replace the lower feed roller. The length of the in-feed conveyor is 150 cm. For both versions, the wood must always be fed by a crane loader. The HJ500 is available with a standard drawbar or a loader drawbar. The loader bed is equipped with pillar and support legs for the flange loader. The recommended load size is approx. 45kNm gross lifting moment and a minimum reach of 7m.