Mounted track tiller 5|TT

2-sectionwith hydraulic adjustmentdouble offset

The Track Tillr is the ultimate machine for repairing the tracks and ruts caused by center pivots. Most pivot track fillers do exactly that: They fill the track with trash and then cover it with a layer of dirt. The Track Tillr uses an entirely new set of tooling to bust up hard ruts, fill the track with soil (not trash), and pack it and feather out the soil surface up to 99″ wide. Wider Footprint Up to 88 percent wider than standard track fillers, the Track Tillr’s unique design repairs swells in tracks caused by years of using V-shaped track fillers that funnel all the soil to the center. Heavyweight Champ The heavy-duty frame is up to 70 percent heavier than the competition, enabling better penetration, more consistent depth control and smoother finish. Mid-Frame Packer Optional mid-frame packer can apply up to 1500 lbs of spring force right in the center 10.5 inches of the track, to pack the soil right where it needs it, in the pivot track. Three Times Flatter The unique tooling design creates a level seedbed across the full width of the Track Tillr that in replicated studies has been shown to be nearly three times flatter than the standard track filler that funnels all the residue and soil to the center of the machine. Eliminates buried residue Buried residue in the track causes inconsistent packing. This residue can be very problematic when strip-tilling because the residue buried in the bottom of the track tends to cause some machines to plug when crossing pivot tracks. The Track Tillr has been shown to reduce the amount of buried residue significantly in this zone.