Circular sawmill AutoCut

verticalportableon casters

The fully automatic firewood processor AutoCut from POSCH ideally achieves, depending on cutting length and billet size, a throughput of 15 cubic metres per hour with one operator. With the touchscreen of the electronic control unit, you can easily set the desired cutting length and the admissible length deviations of the billets ready for the stove. Cord firewood with a max. length of 120 cm can be put continuously in the timber trough at an ergonomic height. The continuous feed passes the timber past the optical measurement sensor to the saw blade. The precise measurement of the billet length and the cutting to the desired length into billets ready for the stove is realised by the electronic control unit. Every billet is sawn (depending on billet length, cutting length and tolerances) in such a way that no offcuts are produced, or cut into billets of the same lengths with offcut. The billets ready for the stove are loaded via a timber chute or by means of a conveyor belt. -EasyGo – feed system with integrated log length measurement for uniform billets without offcuts -Adjustment of the cutting length and the tolerances via CutControl with touchscreen -High-quality WIDIA circular saw blade Ø 70 cm in reinforced design especially for automatic saws -Max. cutting diameter 23 cm or 4-5 billets D15 for max. output of 15 cubic metres per hour. -Billet length max. 120 cm -Ergonomic feed height at a height of approx. 100 cm -V-belt drive for optimum cutting speed and higher cutting power -Automatic speed monitoring -Stationary model with forklift attachment -Ejection via timber chute with ejection height 100 cm