Packer roller RSR series

CambridgeringCrosskill

The Quivogne RSR, the roller that can be adapted to suit your requirements! Available from 2m to 4,50m working widths, the QUIVOGNE RSR is a very simple roller, but it is very flexible where your requirements are concerned: in fact you are able to choose between 6 cast-iron rings and you can even use it on a front linkage thanks to its optional steering hitch. TECHNICAL SPECIFICATIONS Mounted or trailed. Cat.1 and 2 linkages. The drawbar is for trailed use but when it is in the vertical position it serves as the upper link of the three point linkage. The frame is a 150x100x8 beam with a jack leg. Shaft Ø 70mm, the bearing housings are self-aligning. They are mounted on the outside of the frame in order to avoid leaving marks when using the following rings: notched Cambridge Ø 530, Cambridge Ø530, Cambridge Ø620, wavy Ø 500, Ø 600, plain Ø 550, and heavy Crosskill Ø 550. It is possible to join 2 or 3 units together as a trailed combination, giving working widths from 3,50 m to 13,00 m (allow a minimum of a 25 cm overlap between the outer rollers and the central roller). The 4.00 m and 4.50 m models are supported by 4 bearing housings: 2 outer bearings and 2 hubs that are aligned with the tractor wheels. Marker boards.