Greenhouse paint remover ReduClean

ReduClean has been specially developed to easily remove ReduSystems coatings from the greenhouse cover. For the use of a Dosatron® pump and for diffuse coatings, there are special ReduClean versions: ReduClean DT and ReduClean for diffuse coatings. ReduSystems coatings are very wear-resistant. This means that they must be actively removed at the end of the season when they are no longer needed. ReduClean ensures that the coating dissolves. The rain then washes away the dissolved coating of the greenhouse cover. PROPERTIES o - ReduClean makes ReduSystems coatings water-soluble. Rain then washes away the coating o - Suitable for any greenhouse cover: glass and all types of plastic o - The removal agent leaves AntiReflect intact ReduClean can be used to remove ReduSol, ReduHeat and ReduFlex Blue. To remove ReduFuse and ReduFuse IR, you need a special version of ReduClean: ReduClean for diffuse coatings. 1. Shake cans well before use. 2. Add 250 L ReduClean per hectare to clean water in a dilution ratio of between 1:5 and 1:7, stirring continuously. 3. Check whether the waterways and surroundings are suitable for the inflow of ReduClean. 4. Apply ReduClean evenly to a dry greenhouse surface and allow it soak in for at least 15 minutes before brushing. Or apply ReduClean when a considerable amount of rain is expected within one week. Only apply ReduClean for diffuse coatings when a considerable amount of rain is expected within two days. 5. Make sure that the entire coating is moistened. Sections that are not moistened will not be removed.