Fan controller SLRK,SST,FSV-1

Motor controllers SLRK For the conversion of a 0/2 - 10 V control signal to a drive with feedback potentiometer. The drive is driven between the end stops programmed during commissioning by means of the motor controller evaluating the signals from the feedback potentiometer. In doing so the requirements regarding pulse-pause operation for the REVENTA® electro cylinders are taken into account. By means of manual operation, the drive can also be driven with the direction buttons. Even with this manual operation the end positions programmed during commissioning cannot be exceeded. SST Position transmitter Manual control panel for constantly regulated servomotors and electro cylinders. Automatic operation or manual operation possible via potentiometer. Additional inverting of the control signal via internal control. SLRK Position transmitter SLRK servomotor with changeover switch and coupling relay. Protective class IP66 for 0 - 10 kΩ motors. Individual components for manual retraction and extension of the electro cylinder. Possible to change over to automatic mode. The operating voltage of the motor is routed via two contactors in order to protect the computer. These contactors are switched by the climate computer. Advantage: The high switching currents are not routed through the computer's relays. Possible switch positions: 0/open/close/automatic.