Grain mill G7
for animal feedrollerwith screw conveyor

Grain mill - G7 - Rivakka Nipere Oy - for animal feed / roller / with screw conveyor
Grain mill - G7 - Rivakka Nipere Oy - for animal feed / roller / with screw conveyor
Grain mill - G7 - Rivakka Nipere Oy - for animal feed / roller / with screw conveyor - image - 2
Grain mill - G7 - Rivakka Nipere Oy - for animal feed / roller / with screw conveyor - image - 3
Grain mill - G7 - Rivakka Nipere Oy - for animal feed / roller / with screw conveyor - image - 4
Grain mill - G7 - Rivakka Nipere Oy - for animal feed / roller / with screw conveyor - image - 5
Grain mill - G7 - Rivakka Nipere Oy - for animal feed / roller / with screw conveyor - image - 6
Grain mill - G7 - Rivakka Nipere Oy - for animal feed / roller / with screw conveyor - image - 7
Grain mill - G7 - Rivakka Nipere Oy - for animal feed / roller / with screw conveyor - image - 8
Add to favorites
Compare this product
 

Characteristics

Application
grain, for animal feed
Type
roller
Other characteristics
with screw conveyor, mobile, high-capacity
Production capacity

Max.: 25,000 kg/h
(55,115.57 lb/h)

Min.: 10,000 kg/h
(22,046.23 lb/h)

Description

The Rivakka Greenmaker G7 3-point linkage version is a tractor-driven roller mill for fresh or dry grain. Easy to operate and serice points are easily check daily. The mill’s serrated-edged, hardened rollers efficiently pull grain inside and thoroughly crush even the smallest grains. The spacing of the rollers can be adjusted quickly with a stepless adjusting nut and locked in place with a lever. This keeps the roller gap always same unlike spirng loaded or hydraulic jack versions. If something too big for the rollers passes through, the rollers are protected from damage by a quickly replaceable shear bolt. The stainless steel discharge funnel diameter ø220mm ensures efficient unloading to both sides at a steplessly adjustable height. The discharge funnel folds in half, making the mill easy to transport. Utilize the advantages of wet preservation at times of high oil prices. Max crimping dry* 25 000 kg/hour Max crimping wet* 10 000 kg/hour Power requirement 80 hp Length of rollers 700mm Diameter of rollers ø250mm Power to rollers Hopper volume 250 litre and extra hopper 3 000 litre ( 3m³) Length 1877 mm Width 2998 Height in transit 2560 mm Unloading pipe length 4 000 mm Unloading pipe diameter ø220 mm Weight 1430 kg *Maize
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.