Rear-mount mower SILVERCUT 300 S

disc14 blades7 discs

The construction of the SILVERCUT DISC 300 S mower ensures optimal power transmission and efficient mowing. The mower follows the ground perfectly and provides complete control over mowing, regardless of the complexity of the terrain. SEQUENTIAL LIFT OF CUTTER BAR - SL Hydraulic stabilisation (HS) enables the sequential lift (SL) of the cutter bar. The inside of the cutter bar is lifted first, and then the outside of the cutter bar. DIRECT DRIVE Direct drive to the first disc via a PTO shaft, angle drive and double PTO joint. COLLISION SAFETY SYSTEM - CSS The collision safety system (CSS) is released immediately in the event of a collision with an obstacle. The special position of the hinge enables the cutter bar to move simultaneously backward and upward. After colliding with an obstacle, the cutter bar automatically returns to the operating position. EXCELLENT ADAPTATION The hydropneumatic suspension system (HPS) ensures excellent adaptation to the ground and thus a precise cut and clean forage on all terrains and in all conditions. The relief rate can be easily and quickly adjusted before or during mowing. SAFE TRANSPORT Linkage with a safety transport system separated from the cutter bar partial lifting block allows good manoeuvrability when turning at the headlands. TRANSPORT AND STORAGE The transport position of the mower is 120° behind the tractor. In the same position, the mower can be stored on the stand (optional) in an area of 3,2 m2. Attributes Blade dimensions:110x48x4 Discs rotation speed:3000 Capacity:3.50 Cutting height:40-70