Rear-mount mower SILVERCUT 340 S RRC
disc16 blades8 discs

Rear-mount mower - SILVERCUT 340 S RRC - SIP STROJNA INDUSTRIJA d.d. - disc / 16 blades / 8 discs
Rear-mount mower - SILVERCUT 340 S RRC - SIP STROJNA INDUSTRIJA d.d. - disc / 16 blades / 8 discs
Rear-mount mower - SILVERCUT 340 S RRC - SIP STROJNA INDUSTRIJA d.d. - disc / 16 blades / 8 discs - image - 2
Rear-mount mower - SILVERCUT 340 S RRC - SIP STROJNA INDUSTRIJA d.d. - disc / 16 blades / 8 discs - image - 3
Rear-mount mower - SILVERCUT 340 S RRC - SIP STROJNA INDUSTRIJA d.d. - disc / 16 blades / 8 discs - image - 4
Rear-mount mower - SILVERCUT 340 S RRC - SIP STROJNA INDUSTRIJA d.d. - disc / 16 blades / 8 discs - image - 5
Rear-mount mower - SILVERCUT 340 S RRC - SIP STROJNA INDUSTRIJA d.d. - disc / 16 blades / 8 discs - image - 6
Add to favorites
Compare this product
 

Characteristics

Mounting
rear-mount
Technology
disc
Number of blades
16 blades
Number of discs
8 discs
Other characteristic
PTO-driven, with roller conditioner, for tractors
Working width

3.32 m
(10'10" )

Power required

90 ch
(90 hp)

Swath width

Min.: 1.6 m
(5'02" )

Max.: 3 m
(9'10" )

PTO speed

1,000 rpm
(6,283.2 rad.min-1)

Weight

1,524 kg
(3,359.8 lb)

Description

The construction of the SILVERCUT DISC 340 S RRC mower ensures optimal power transmission and efficient mowing. The mower follows the ground perfectly and provides complete control over mowing, regardless of the complexity of the terrain. With conditioning, faster wilting or drying can be achieved, thus preserving nutrients and ensuring better forage quality. SEQUENTIAL LIFT - SL Hydraulic stabilisation enables the sequential lift of the cutter bar. The inside of the cutter bar is lifted first, and then the outside of the cutter bar DIRECT DRIVE Direct drive to the first disc via a PTO shaft, angle drive and double PTO joint. CSS -COLLISION SAFETY SYSTEM The collision safety system is released immediately in the event of a collision with an obstacle. The special position of the hinge enables the cutter bar to move simultaneously backward and upward. After colliding with an obstacle, the cutter bar automatically returns to the operating position. HYDRO-PNEUMATIC SUSPENSION - HPS The hydropneumatic suspension system (HPS) ensures excellent adaptation to the ground and thus a precise cut and clean forage on all terrains and in all conditions. The relief rate can be easily and quickly adjusted before or during mowing. SAFE TRANSPORT Linkage with a safety transport system separated from the cutter bar partial lifting block allows good manoeuvrability when turning at the headlands. TRANSPORT AND STORAGE The transport position of the mower is 120° behind the tractor. In the same position, the mower can be stored on the stand (optional) in an area of 3,2 m2.

Catalogs

No catalogs are available for this product.

See all of SIP STROJNA INDUSTRIJA d.d.‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.