Horizontal agitator GIANTMIX FR 30°

inclinedelectrically-poweredstainless steel

For an optimized biological process by almost constant substrate level •Ex-motors of rated output 7.5/11/15/18.5 at 200 - 400 rpm (3-phase 50 cycles) •Tube Ø 101.6 mm, ss304 or ss316 •Suitable up to 1.5 m beneath substrate level. Higher immersion depths on request •Authorized for ex-zone 1 within the tank and ex-zone 2 outside the tank •ss304 version of tube and sealing plate, optional ss316 •Sealing through maintenance-free sealing membrane EPDM 60 •Inclination adjustment by upper control arm, toothed rack with winch or hydraulic drive •Fast installation outside the tank - also afterwards •POM protection to minimize abrasion •Giantmix FR HY only with PTO drive and without motor possible Application: The Giantmix FR 30° has been specially designed to optimize the biological processes in primary and secondary fermenters with nearly constant substrate levels. Easy maintenance: One advantage of the design of the Giantmix is that almost all of maintenance duties can be carried out from the outside, which means that opening the digester or dismounting the unit is not necessary. The drive side with the electric motor and transmission is accessible from the outside, only the shaft tube and propeller are within the fermenter and in an optimal position for thorough mixing. Optional PTO drive: The Giantmix FR can be ordered with an optional protective device and PTO connection.