Irrigation pump 10”WPS®

dewateringwatersubmersible

All the internal and external metal components of the 10”WPS® pumps are constructed out of stainless steel AISI 304 or AISI 316 throughout and are being cold pressed from stainless steel sheet. The suction interconnector and the discharge chamber are casted. 10” WPS® submersible pumps are suitable for both continuous and intermittent operation for a variety of applications: .general water supply .waterworks and fountains .tank applications .pressure boosting .heating pumps .dewatering, mining and other industrial applications Features 10” WPS ® pump range consists of three nominal flow models: 120, 155 and 220m³/h. The 10′ WPS® pump have a capacity up to 280m³/h and a maximum head of 450m The rotation is counter clockwise when looking into the discharge. Coupling to the motor following NEMA standard. The pump-end is entirely made out of Stainless Steel DIN 1.4301, AISI 304 or DIN 1.4401, AISI 316 for the N version. the 10” WPS® can run continuously in vertical or horizontal position. Overall diameter of the pump is 247mm and thus fits into 10” or larger drilled wells. The pumps are standard equipped with a 6” submersible motor up to 30kW power, a 8” submersible motor from 37kW up to 83kW and a 10” motor from 93kW up to 185kW. For specific working conditions, Please contact Well Pumps S.A.