{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Flow: 250 m³/h
Power: 7.5 kW - 22 kW
CHIOR VPH Long-Shaft Cutting Pumps with suction from above and double chopping tool excel through their high pumping capacity and cutting efficiency. The design of the pump housing, either made of cast ...
Flow: 330 l/min - 3,000 l/min
Pressure: 50,000 Pa
Power: 0.8 kW - 7.5 kW
... transmission and squared pumps to optimise heat dispersion. The three-way capillary oiler ensures precise oil dosing and no waste. TECHNICAL SPECIFICATIONS • Product category/Pump type: Belt driven ...
Milkline NG SpA
... units with modem for a complete remote control; .Motor-pump unit on self-supporting frame with fuel tank; .JOHN-DEERE and IVECO-FPT motors; .Caprari / Rovatti / Sidermeccanica multi-rotor pumps, according ...
CASELLA MACCHINE AGRICOLE Srl
... units with modem for a complete remote control; .Motor-pump unit on self-supporting frame with fuel tank; .JOHN-DEERE and IVECO-FPT motors; .Caprari / Rovatti / Sidermeccanica multi-rotor pumps, according ...
CASELLA MACCHINE AGRICOLE Srl
... units with modem for a complete remote control; .Motor-pump unit on self-supporting frame with fuel tank; .JOHN-DEERE and IVECO-FPT motors; .Caprari / Rovatti / Sidermeccanica multi-rotor pumps, according ...
CASELLA MACCHINE AGRICOLE Srl
Flow: 18 m³/h - 179 m³/h
Pressure: 3 bar - 11 bar
Power: 83 ch
... hydraulic power unit. STANDARD EQUIPMENT •Motor IVECO F32 MNSA01.00 83 HP with Caprari pump MEC MG 80/A •ELCOS control box CEM 250 •Manual priming pump •Hydraulic kit for jack, turntable rotation ...
IRRIMEC s.r.l.
Flow: 18 m³/h - 168 m³/h
Pressure: 3 bar - 11 bar
Power: 126 ch
... hydraulic power unit. STANDARD EQUIPMENT •Motor IVECO N45 MSTA20.50 126 HP with Caprari pump MEC MG 80 4/3 A •ELCOS control box CEM 250 •Manual priming pump •Hydraulic kit for jack, turntable ...
IRRIMEC s.r.l.
Flow: 33 m³/h - 203 m³/h
Pressure: 3 bar - 11 bar
Power: 175 ch
... power unit. STANDARD EQUIPMENT •Motor IVECO N67 MSTA20.00 A800 175 HP with Caprari pump MEC MG 100 HT 2 A •ELCOS control box CEM 250 •Manual priming pump •Hydraulic kit for jack, turntable rotation ...
IRRIMEC s.r.l.
ELECTRIC PUMPS FOR IRRIGATION AND INDUSTRIAL APPLICATIONS
IRRILAND Srl
Pressure: 2 bar - 16 bar
Irriland produces motor pump units for agricultural applications (e.g. irrigation by sprinkling, drip irrigation, pivot irrigation, etc.) and / or for industrial applications (e.g. motor pumps for fire-fighting ...
IRRILAND Srl
Elephump, the innovative configuration for motor pumps designed and patented by Irriland, which allows you to have a machine with a suction complex, up to 8 meters in length in a single piece, which can be folded on itself ...
IRRILAND Srl
Flow: 0 l/min - 600 l/min
Clean water pumps are great for general water transfer, pool water removal, irrigation, and civil engineering. The pump housing and pump cover are made with durable aluminum alloy, along ...
JSC Mototecha
Flow: 0 l/min - 900 l/min
Clean water pumps are great for general water transfer, pool water removal, irrigation, and civil engineering. The pump housing and pump cover are made with durable aluminum alloy, along ...
JSC Mototecha
Flow: 0 l/min - 900 l/min
Functions of the flow distribution system: -tank filling; -mixing the contents of the container; -pipeline closing; -filling the sprayer using the same filling hose. Self-priming design makes your job much easier (requires ...
JSC Mototecha
Flow: 138 l/min - 3,116.66667 l/min
Pressure: 5, 10, 15, 20 bar
Power: 0.9 kW - 7.1 kW
Configuration: 3 diaphragms in Desmopan® . Parts in contact with spray liquid: plastic coated aluminium and poliamide. Standard: pressure accumulator. On request: safety valve and PTO protection. Applications and Uses For weed control ...
COMET S.p.A.
Flow: 9,200, 8,200, 7,200 us gal/min
Power: 185, 290, 240 ch
The single 10” outlet operates at maximum efficiency, creating less turbulence and wear than multi-ported volute models. THE BIG GUN The 8” diameter cannon delivers high-powered, long distance agitation. BUILT FOR SAND Extra heavy ...
Valmetal
Power: 130, 180 ch
... to nothing in just seconds. COMBINES THE HIGH-VOLUME MIXING OF A PROPELLER AGITATOR with the power and reach of a lagoon pump. The resulting hybrid design radically out-performs both. THE BEST CHOICE FOR THE WORST ...
Valmetal
Power: 100 ch - 240 ch
... position to the tanker loading position from the seat of the tractor .After use, the POWER BOOM is self draining so the Ultra Pump can be packed up for transport within seconds, all without mess or spillage
Valmetal
Flow: 300, 360 m³/h
Pressure: 0 bar - 4.5 bar
Power: 5.5 kW - 30 kW
... THAN JUST A PUMP In order to be able to transport especially thick and fibrous media in a safe and controlled manner, such as slurry or digestate in biogas plants, our pumps (4000 series) also tear ...
Self-priming hand pump for suction from open containers or from streams and ponds. Perfect for use in construction and for industrial painting. It can also be used for the suction and movement of non-potable ...
Flow: 0.2 l/min - 0.29 l/min
Ambic acquired the RFE range of peristaltic pump products in 2013, adding dosing and dilution capabilities to its product range. RFE peristaltic pumps and pump assemblies have been produced ...
Ambic Equipment Ltd.
Flow: 0.25 l/min - 0.89 l/min
... noise because there is more surface contact and less rolling during operation whilst the presence of bearings in the motor help reduce losses in performance. The fact that there are more teeth in contact also enables ...
Ambic Equipment Ltd.
Flow: 0.95, 1.1 l/min
... highest quality chemical resistant materials. A key safety feature of the peristaltic pump is the fact that the pumped product only makes contact with the pump tube; the pumps also have ...
Ambic Equipment Ltd.
Power: 4 kW - 11 kW
... produces specific electric pumps for the distribution of liquid feed entirely built in stainless steel, robust, reliable and resistant to abrasion in different models and powers from 4 to 11Kw. To cope with the heavy ...
Flow: 5,000 l/h
Pressure: 5 bar
Power: 1.5 kW
The VP pump can be connected to the water flow heaters DH7 and DH5. The pump is required for a non-pressurized supply of water from water tanks or from natural waters, and for water supply ...
Power: 2.2, 1.5 kW
... Fristam Milk Pump has been designed with precision to provide the ultimate in reliability with minimal maintenance and service costs, and is engineered to stand the test of time. Using an electronic Variable Speed ...
Waikato Milking Systems NZ Ltd.
Flow: 5,000 l/min
... vacuumpump for starting up. Optional a Vogelsang rotary lobe pump can be fitted for feeding the centrifugalpump. The centrifugalpump is driven by the PTO from the tractor. The vacuumpump or rotary-lobe pump ...
Schouten Machines B.V.
Flow: 5,000 l/min
... pumping the slurry to the injector and a Vogelsan rotary-lobe pump for suction the slurry and feeding the centrifugalpump. The centrifugalpump is driven by the PTO from the tractor. The rotary-lobe pump ...
Schouten Machines B.V.
Flow: 5,000 l/min
... pressure-centrifugal pump with a ceramic-mechanical axle seal. On top of that, the pump has a pre-cutting knife for cutting up straw and feed residue. To start up the pumping process a hydraulic driven ...
Schouten Machines B.V.
Flow: 30 l/min
Pressure: 7 bar
The FLUX air-operated diaphragm pump RFM/RFML 10 is self-priming and protected against dry running. The pump is distinguished for its versatility and can be used for pumping low to high viscosity media ...
Flux
Power: 55 kW - 175 kW
... irrigation plant. PERFECTLY MATCHED Convincing benefits Our powerful diesel pump units are the first choice whenever a portable solution is required. The pump and motor are perfectly ...
BAUER Ges.m.b.H. Röhren- und Pumpenwerk
... whether your installation is large or small. ADVANTAGES AT A GLANCE LONGER PUMP LIFE Engineered air gaps provide cooler operating temperatures for improved pump life. Gears and bearings are splash ...
Flow: 460 m³/h
Power: 0.8 kW - 75 kW
•Double chopping system •Head 112 m •Suction inlet: 65 – 200 mm •Discharge outlet: 40 – 150 mm
CRI-MAN S.p.A.
Flow: 90 m³/h - 522 m³/h
Driven by the tractor P.T.O., the pump takes the liquid manure from the bottom of the pit and throws it via a side outlet in order to remove it. This outlet is horizontally and vertically adjustable in order to fit the ...
Flow: 55, 77 m³/h
Pressure: 5, 8 bar
Pumps in the IQ112 series are the ideal solution for when you need quick maintenance, cost-saving service, easy handling and maximum availability. With capacities of up to 77 m3/h and pressures up to 8 bar, this is the ...
Hugo Vogelsang Maschinenbau GmbH
Power: 75 ch
... with innovative features for demanding dairy applications including vertical pit pumps, agitators, mixing pumps and dairy flush pumps. With the ability to configure our pumps ...
Flow: 1,300, 1,200 l/min
Pressure: 210 bar
Rugged, self priming centrifugal pumps with hydraulic motor for filling or transfer of large tank volumes Technical -3" inlet/outlet threads Technical data hydraulic motor: -max. 49 l/min oil flow
agrotop GmbH
milkrite | InterPuls
Flow: 25 l/min - 72 l/min
Power: 8 ch - 13 ch
two tyre galvanized frame with manual handle to move the motor pump, standard engine drive and hand starting, suction and delivery flanges on the pump.
IDROFOGLIA Srl
Please specify:
Help us improve:
remaining