Avant Tecno Oy standard shovel buckets

Width: 1,350, 1,150, 1,750, 1,550, 1,950 mm
Capacity: 550, 450, 700, 600, 400 l
Bucket weight: 308, 350, 243, 262, 282 kg

Hydraulic bucket applicable to ail forklift trucks • Available with 1 or 2 cylinders Application fields Material handling of loose products, sand, inerts, gravel, snow, etc. Available on demand with spoonbucket in ...

Heavy-duty bucket with blade, capacity 1,000 l. Suitable for moving aggregates, sand, gravel and similar materials around site. This attachment is available for TH range and HTH 10.10 model.

Width: 125, 140, 150 cm
Capacity: 400, 450, 500 l

Applicable to industrial forklifts. Suitable for soil, rocks, grains and olives

Width: 980, 1,050, 1,150, 1,300 mm
Capacity: 190, 208, 230, 264 l
Bucket weight: 64, 68, 72, 78 kg

Available in different widths, the Neomach standard buckets can be installed with quick connection and are suitable for a wide range of uses, facilitating the handling of common material thanks to their ...

Width: 850 mm

For cleaning hard surfaces and directly catching the dirt into the bucket. Excluding bucket.

Width: 1,350 mm - 2,550 mm
Capacity: 0.43 m³ - 0.69 m³
Bucket weight: 213 kg - 331 kg

Bucket used for earth handling, characterized by a special rear reinforcement that ensures greater resistance under stress, allowing you to lift a greater weight. This bucket is equipped with holes along ...

Width: 1,500 mm
Capacity: 350 l

The 4-in-1 multifunction bucket allows grabbing, picking up, loading and unloading of waste or result material in the various stages of operation site management. It is also combined with the MWS1500 sweeper to carry ...

Width: 120, 150 cm
Capacity: 155, 215 l

... similar material, but also for leveling the ground by using it on the reverse side, always easy and safe to use it. Available standard with blade or with forged teethes on request.

Width: 2,350 mm
Capacity: 1 m³

Shovel bucket A.TOM Evolution 1.0 m³ for JCB, Manitou, Bobсat, New Holland, Claas, Merlo, Dieci, Faresin telehandlers. Steel thickness - 6 mm. Blade – Hardox. Height - 811 mm Depth - 1110 mm Weight - 485 kg

3/16” material, 1/4” end plates 3/4″ x 4 bevelled cutting edge Reinforced top lip Reinforced round back & end plates for strength,easy filling & clean out Flat top acts as a level indicator 35” deep, 31” high Heavy DUTY 1/4” ...

Capacity: 0.38 m³ - 2 m³

Bucket weight: 220 kg

Our hydraulic shovel is suitable for transporting wood thanks to the forestry setup that allows you to lift the load. Furthermore, it is also suitable for loading any material by pushing the tractor in reverse: manure, ...

Width: 1.6 m
Capacity: 1.08 m³

... Albutt range of JCB Teletruk buckets have been designed beside a Teletruk machine to provide users with the correct attachment for their requirements. The range is made up of the standard bucket, ...

Width: 49.5 in
Capacity: 4.75 ft³

... cylinders Grade 50 steel with side stiffeners nearly 40% stronger than regular steel Bucket bottom and clamshell are reinforced Optional bolt-on cutting edge Multitasking bucket keeps you productive Great ...

Width: 48, 60, 72, 84, 96 in
Capacity: 6.3 ft³ - 32.13 ft³

Available in 48", 60", 72", 84", 96" and 100". Capacities range from 6.3 cu. ft. up to 1.19 cu. yd.

Width: 150 cm

Our loader bucket which is manufactured as a rear loader and connected to your tractor through 3-point linkage system can be used for scraping operations as well as a loader Compared to other rear loader buckets, ...

Capacity: 200, 250 l

The concrete mixing bucket allows the operator to load, mix, transport, and discharge concrete much faster than the traditional stand-along mixer and wheel barrow. This units compact size, when combined with the MultiOne, ...

Capacity: 220 l

Mec Rul's Rear Shovel is attached to the tractor by the PTO system. Designated to carry limestone, soil, silage and other materials. Easy and practical unloading using the lever. Height adjustment system resulting in ...

Width: 1,200 mm
Capacity: 300 m³

Tractor Rear Loader Bucket Total Length - 1800 mm Total Height - 1860 mm Total Weight - 360 kg Bucket Depth - 475 mm Bucket Curvature Half Diameter - 280 mm Max. Lifting Height ...

Bucket weight: 170 kg

Let the Combi-Shovel take care of heavy lifting - and save yourself a great deal of time and lifting. You decide whether it should be fitted on the front or the rear. Flexibility When you acquire a Combi-shovel, ...

Width: 0.8, 1, 1.8 m
Bucket weight: 90, 102, 193 kg

Soil bucket for front loader with pawl attachment. AT A GLANCE .Sturdy design .Available in 3 sizes .Pawl hook available for STOLL loaders

Width: 2,500, 1,880, 2,370 mm
Capacity: 0.8, 1.1, 1.5, 1.7 m³
Bucket weight: 295, 340, 430, 475 kg

... emptied. • Hardened 150mm x 20mm and 200 x 25 steel cutting edge as standard. • 10mm straps around shell for superior structural integrity. • Weld on hitch brackets on all buckets.

Width: 36, 42, 44, 48, 54 in
Capacity: 7.2 m³ - 13 m³

Tall back design to increase capacity. Available Widths 36″, 42″, 44″, 48″, 54″ • 1/4″ SHELL & 3/16″ SIDE PLATES • GRADING BEND FOR OPTIMAL REVERSE GRADING • 1/2″ x 4″ WELD-ON EDGE