SUMA submersible agitators

Agitator for smaller tanks with low dry matter content •Propeller in hardened steel,galvanized, ss304 or ss316 •Mechanical seal SiC/SiC •2 separated oil chambers for motor and bearing housing •Longlife-oil within ...

... to 55°C is possible. Flow preservation: Because of the slow propeller speed and the greater propeller diameter this submersible motor is mainly for the flow preservation. Gear: The resilient planetary gear has ...

... system avoids the direct contact to the guiding mast and gives a galvanic isolation. The ss316 rope is also isolated to the submersible motor through a special socket. Guiding system: Through cable clips the connection ...

Submersible motor for higher performance requirements •Propeller in hardened steel, galvanized, ss304 or ss316 •Mechanical seal SiC/SiC •3 seperated oil chambers for motor, gear and bearing housing •Longlife-oil ...

... minimize abrasion The submersible mixer Optimix 4G convinces with its high thrust of 6.5 kN. The agitator easily masters a dry matter content of up to 14 %. This makes it the ideal mixer for use in ...

... nominal power of 0.8/1.5/2.2 kW demonstrate distinctly the know-how of the small submersible mixer. Due to the high rotation speed from 714 rpm up to 738 rpm, the compact agitator is ideally applicable ...

Agitator for agressive media and low pH environments •propeller in ss304, optional hardened ss304 or ss316 •Mechanical seal SiC/SiC •3 seperated oil chambers for motor, gear and bearing housing •Longlife-oil within ...

Perfect suitable for closed pits and small space within the building •Submersible motor with 7.5 kW and 1.450 rpm •For a depth up to 3.5 m •Swivel range +/- 110° •Pit opening at least 35x60cm If it gets tight ...

Fits perfectly in small buildings •Submersible motor with 9 kW and 380 rpm •Tilt range + / - 110° •Chassis width 970 mm •Optional with telescopic version up to 2,75 m When space inside buildings becomes tight, ...

the stationary submersible motor for your slalom system Optimix 2G: 9.0 / 13,5 / 15.0 kW Adjustable in height through cable winch Suitable for a pit depth of 4 m Optional available completely in ss304 Application: For ...